Osmo Polyx Oil Raw 3044

Price Range: £24.77 - £75.03
Price £24.77
In stock
Next day delivery available

beautifully smooth finish with nearly-invisible protection.

Osmo Polyx Oil Raw retains the 'raw', light characteristics of untreated wood. No more 'permanent wet look'. The ingredients use a small amount of white pigments to neutralise this effect after application of a clear oil. The end result is a smooth, beautiful finish with nearly-invisible protection. Keeps light interior wood looking light.

Ideal For

  • Maple
  • Bamboo (thin application)
  • Birch
  • Beech
  • Alder
  • Ash
  • Spruce/Pine
  • Pine
  • Cork (thin application)
  • Larch
  • OSB, sanded (thin application)
  • Pitch Pine
  • Robinia/Locust

Features

  • Ideal for Interior Timber - especially untreated softwoods
  • Nearly invisible protection, no permanent 'wet effect.'
  • Resistant to Wine, Beer, Cola, Tea, Fruit Juice, Milk and Water (In accordance to DIN 68861-1A – no water spots)
  • The microporous surface allows the wood to breathe and reduces swelling and shrinkage.
  • Safe for humans, animals and plants. Suitable for children‘s toys as per EN 71.3 (European norm). Saliva and Sweat resistant in accordance to DIN 53160 (German industrial norm).

Technical Information

Brand Osmo
Coverage 24m² per litre
Application Brush, Roller, Pad
Drying Time Touch dry in 8–10 hours @ 23°C
Coats 2 coats recommended
Cleanup Osmo Brush Cleaner and Thinner 8000
Storage 5 years if can kept dry and firmly shut. Store for 24–36 hours at room temperature before use
VOC 500g/l
Ingredients Based on natural plant oils and waxes (sunflower oil, soya oil, thistle oil, carnauba wax and candelilla wax), paraffin, siccatives (drying agents) and water-repellent additives. Dearomatized white spirit (benzene-free)
MPN 3044

Alternative Osmo Products

Product Use
Osmo Polyx Oil OriginalOsmo Polyx Oil Original

The original, clear hardwax oil designed for most wooden floors & surfaces. Available in Satin, Matt, Semi-Matt and Glossy

Osmo Polyx Oil TintsOsmo Polyx Oil Tints

Use as a base coat - especially recommended for wooden floors. 

Alternatively use 2 coats of Polyx Oil Tints for a strong depth of colour on low-traffic areas.

Osmo Wood Wax Finish Extra ThinOsmo Wood Wax Finish Extra Thin Use as an alternative to Polyx Oil Original for hardwoods, such as Teak, Ipe & Meranti
Osmo Polyx Anti SlipOsmo Polyx Oil Anti Slip Polyx Oil with anti-slip properties - use for stairs or flooring
Osmo Polyx Oil RapidOsmo Polyx Oil Rapid Cuts drying times in half. Perfect for when time is of the essence.
Osmo Polyx Oil ExpressOsmo Polyx Oil Express Osmo's quickest every drying wood oil
Osmo Polyx Oil 2KOsmo Polyx Oil 2K Two-part flooring oil for professional, machine application only

Documents

Product Information
Safety Data Sheet


Preparation

Perfect sanding is a must for a clean and attractive surface finish. Please see the technical data sheet for the recommended sanding sequences for the surface you are treating. 

A trial application of Polyx Oil Raw is recommended on a small section of the substrate before commencing.


Application

Oils enhance the natural tone of wood. Applying the product too generously and with insufficient ventilation will lead to delays in drying.

For dark and extractive-rich hardwoods (e.g. Wenge, Merbau, Jatoba etc.), we recommend using Osmo Wood Wax Finish Clear Extra Thin. For Cork surfaces, due to their high absorbency please ensure that the wood finish is applied thinly. Longer drying times are to be taken into consideration (at least 24 hours).

Apply a thin coat to the clean and dry surface along the wood grain with Natural Bristle Brush, Microfibre Roller or 150mm Floor Brush, and spread well.

Allow to dry for approximately 8-10 hours with good ventilation. Lower temperatures and/or higher air humidity can increase the drying time. After drying, quickly apply a second thin coat. When renovating or recoating an already oiled surface, one coat applied to the clean and dry surface is usually sufficient.

After 2-3 weeks, the surface is completely and thoroughly hardened.


Aftercare

Wood surfaces treated with Polyx®-Oil are easy to maintain.

Remove coarse dirt with a broom or a vacuum cleaner. To clean, add Osmo Wash and Care concentrate to mop water and clean the surface with a damp mop. To refresh and clean intensively, use Osmo Liquid Wax Cleaner when necessary.

If a higher gloss level is desired, after thoroughly drying apply Osmo Liquid Wax Cleaner thinly and polish when dry.


Product Numbers

Manufacturer's Part Numbers (MPN):
3044S, 3044A, 3044C, 3044D

GTIN:
4006850753185, 4006850732845, 4006850732807, 4006850732814