beautiful, coloured protection for your interior wooden floors and surfaces.
A durable yet elegant satin wood finish. Beautifully smoothens the surface whilst allowing the wood to breathe.
Please Note: For wooden floors it is strongly recommended a top coat of a Clear Polyx Oil is applied over a Polyx Oil Tint. This is due to floors being a high traffic area and using the two in conjuntion provides significantly better protection.
For other suraces however, two coats of Polyx Oil Tints can be applied for a stronger depth of colour.
Only recommended for lightly coloured wood species.
- Solid Wood
- Cork Flooring
- Ceiling Panelling
- Wooden Flooring
- Furniture Surfaces
- Microporous surface allows the wood to breathe - reduces swelling and shrinkage
- Protects and colours
- Resistant to coffee, wine, cola, tea, fruit juice, milk and water (DIN 68861-1C — no water spots)
- When dry, finish is safe for human, animals and plants
- Suitable for children’s toys as per EN 71.3 (European norm)
- Saliva-resistant and sweat proof as per DIN 53160 (German industrial norm)
|Coverage||30m² per litre|
|Application||Brush, Roller, Pad|
|Drying Time||Touch dry in 24 hours @ 23°C|
2 coats for intensive depth of colour
For Interior Wooden Floors: 1 base coat of Polyx Oil Tint followed by a top coat of a Clear Polyx Oil
|Cleanup||White spirit or brush cleaner|
|Storage||5 years if can kept dry and firmly shut. Store for 24–36 hours at room temperature before use|
|Ingredients||Based on natural plant oils and waxes (sunflower oil, soya oil, thistle oil, carnauba wax and candelilla wax), paraffin, siccatives (drying agents) and water-repellent additives. Dearomatized white spirit (benzene-free)|
|MPN||3040, 3067, 3071, 3072, 3073 3074, 3075|
Alternative Osmo Products
|Osmo Polyx Oil Original||
The original, clear hardwax oil designed for most wooden floors & surfaces. Available in Satin, Matt, Semi-Matt and Glossy
|Osmo Polyx Oil Raw||Use to retain the 'raw', light characteristics of untreated wood|
|Osmo Wood Wax Finish Extra Thin||Use as an alternative to Polyx Oil Original for hardwoods, such as Teak, Ipe & Meranti|
|Osmo Polyx Oil Anti Slip||Polyx Oil with anti-slip properties - use for stairs or flooring|
|Osmo Polyx Oil Rapid||Cuts drying times in half. Perfect for when time is of the essence.|
|Osmo Polyx Oil Express||Osmo's quickest every drying wood oil|
|Osmo Polyx Oil 2K||Two-part flooring oil for professional, machine application only|
Wood surface must be clean, dry and frost-free (moisture content max. 18%). Osmo Polyx®-Oil Tints are ready to use, please do not
thin. Stir well before use. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. Fill small cracks, larger joints or holes in wood (Osmo Wood Filler).
If possible, please apply the first coat to all sides before installation. Sand wood surfaces carefully. Begin with coarse sandpaper like Klingspor PS 22 K Velcro Discs — final sanding work for flooring 120–150, for furniture P220–240. Before oiling the surface, remove sanding dust with a broom or vacuum. The finished surface is, among other things, influenced by the wood's natural characteristics. Therefore, a trial application is always required, especially for unfamiliar surfaces.
Oils enhance the natural tone of wood (permanent wet effect). Applying the product too generously and insufficient ventilation lead to delays in drying time.
For dark and extractive-rich hardwoods (e.g. Wenge, Merbau, Jatoba etc.), we recommend using Osmo Wood Wax Finish Clear Extra Thin.
A trial application is recommended.
For cork surfaces, due to their high absorbency please ensure that the wood finish is applied especially thinly. On cork, longer drying times are to be taken into consideration.
Caution: Apply max. one coat thinly to cabinet interiors and drawers with a cloth.
Apply thinly and evenly to the clean and dry wood along the wood grain with Osmo Natural Bristle Brush, Osmo Microfibre Roller or Osmo Floor Brush 150 mm, and spread well. Allow to dry for approx. 24 hours with good ventilation. If a stronger colour intensity is desired, repeat the process (however maximal 2 coats).
Lightly coloured stained effect
Within 20 minutes after application, wipe away product along the wood grain with a cloth or white pad. Allow to dry for approx. 24 hours with good ventilation.
For this we recommend Osmo Wood Wax Finish. Important: Treat flooring maximal one time with Polyx®-Oil Tints. After thoroughly drying, a top coat with a clear Osmo Polyx®-Oil is to be carried out.
Wood surfaces treated with Polyx®-Oil Tints are easy to maintain. Remove coarse dirt with a broom or a vacuum cleaner. To clean, add Osmo Wash and Care concentrate to mop water and clean the surface with a damp (not wet!) mop.
Important: Treat flooring maximum one time with Polyx®-Oil Tints. Any brushstrokes can be removed with an unused dry Microfibre Roller within 30 minutes after applying. After thoroughly drying, carry out a top coat with a clear Osmo Polyx®-Oil.
Manufacturer's Part Numbers (MPN):
3040A, 3040C, 3040D, 3067A, 3067C, 3067D, 3071A, 3071C, 3071D, 3072A, 3072C, 3072D, 3073A, 3073C, 3073D, 3074A, 3074C, 3074D, 3075A, 3075C, 3075D
4006850112470, 4006850112456, 4006850112463, 4006850759330, 4006850759347, 4006850759354, 4006850434817, 4006850434800, 4006850434824, 4006850434831, 4006850434848, 4006850434855, 4006850434862, 4006850434879, 4006850434886, 4006850530724, 4006850530731, 4006850530748, 4006850530755, 4006850530762, 4006850530779