Please ensure you are selecting all options when adding to your basket
Price Range:£26.68 - £81.08
Price £26.68
In stock
SKU
Osmo Polyx Oil Anti-Slip Clear

Highly Durable Wood Wax Finish With Added Slip Resistance. Designed for Interior Use.

A clear, beautiful wood finish with slip-resistant properties. Special additives give a structure to the dry finish. Ideal for staircases, sloped surfaces & ramps.

Please Note:

3088 Clear, Semi-Matt Anti-Slip (R9):

An R9 anti-slip rating is perfect for domestic and commercial applications where a safety floor is not required.

This product is therefore highly recommended for staircases.

3089 Clear, Satin Anti-Slip (R11):

An R11 anti-slip rating is even stronger resistance against slipping and is ideal for sloped surfaces or ramps. We do however not recommend this product for staircases.


Advantages

  • Protective, anti-slip for interior wooden surfaces
  • Ideal for use on wooden floors, steps & staircases
  • Hardwearing & extremely tough
  • Resistant to scratches, scuffs and spillages
  • Easily maintained & renovated if required
  • Does not crack, flake, peel or blister
  • Safe for humans, animals & plants when dry

Key Information

Brand Osmo
Coverage 24m² per litre
Application Osmo Floor Brush recommended
Drying Time Touch dry in 8–10 hours @ 23°C
Coats 2 coats recommended
Cleanup Osmo Brush Cleaner and Thinner 8000
Storage 5 years if can kept dry and firmly shut. Store for 24–36 hours at room temperature before use
VOC 500g/l
Ingredients Based on natural plant oils and waxes (sunflower oil, soya oil, thistle oil, carnauba wax and candelilla wax), paraffin, siccatives (drying agents) and water-repellent additives. Dearomatized white spirit (benzene-free)
MPN 3088, 3089

Alternative Osmo Products

Product Use
Osmo Polyx Oil OriginalOsmo Polyx Oil Original

The original, clear hardwax oil designed for most wooden floors & surfaces. Available in Satin, Matt, Semi-Matt and Glossy

Osmo Polyx Oil TintsOsmo Polyx Oil Tints

Use as a base coat - especially recommended for wooden floors

Alternatively use 2 coats of Polyx Oil Tints for a strong depth of colour on low-traffic areas

Osmo Polyx Oil RawOsmo Polyx Oil Raw Use to retain the 'raw', light characteristics of untreated wood
Osmo Wood Wax Finish Extra ThinOsmo Polyx Oil Wood Wax Finish Extra Thin Use as an alternative to Polyx Oil Original for hardwoods, such as Teak, Ipe & Meranti
Osmo Polyx Oil RapidOsmo Polyx Oil Rapid Cuts drying times in half. Perfect for when time is of the essence.
Osmo Polyx Oil ExpressOsmo Polyx Oil Express Osmo's quickest every drying wood oil
Osmo Polyx Oil 2KOsmo Polyx Oil 2K Two-part flooring oil for professional, machine application only

Documents

Product Information (153kb PDF)
Safety Data Sheet (81kb PDF)


Preparation

Perfect sanding is a must for a clean and attractive surface finish.

Please see the technical data sheet for the recommended sanding sequences for the surface you are treating. 

A trial application of Polyx Oil is recommended on a small section of the substrate before commencing.


Application

Oils enhance the natural tone of wood. Applying the product too generously and with insufficient ventilation will lead to delays in drying.

For Cork surfaces, due to their high absorbency please ensure that the wood finish is applied thinly. Longer drying times are to be taken into consideration (at least 24 hours).

Apply a thin coat to the clean and dry surface along the wood grain with Osmo Soft Tip Brush, Microfibre Roller or Osmo Floor Brush, and spread well.

Allow to dry for approximately 8-10 hours with good ventilation. Lower temperatures and/or higher air humidity can increase the drying time.

After drying, quickly apply a second thin coat.

When renovating or recoating an already oiled surface, one coat applied to the clean and dry surface is usually sufficient.

After 2-3 weeks, the surface is completely and thoroughly hardened.


Aftercare

Wood surfaces treated with Polyx Oil Anti-Slip are easy to maintain.

Remove coarse dirt with a broom or a vacuum cleaner. To clean, add Osmo Wash and Care concentrate to mop water and clean the surface with a damp mop.

To refresh and clean intensively, use Osmo Liquid Wax Cleaner when necessary.

If a higher gloss level is desired, after thoroughly drying apply Osmo Liquid Wax Cleaner thinly and polish when dry.


Product Numbers

Manufacturer's Part Numbers (MPN):
3088C, 3088D, 3089C, 3089D

GTIN:
4006850583973, 4006850583980, 4006850584024, 4006850584031


Write Your Own Review
You're reviewing:Osmo Polyx Oil Anti-Slip
Your Rating