Osmo Wood Wax Finish Extra Thin 1101
specially designed for ingredient-rich hardwoods.
The natural grain and texture is accentuated with this beautiful, satin finish. Give your exotic hardwoods a rich, professional wood finish in one simple application.
- Suitable for exotic hardwoods like Wenge, Merabu and Zebrano
- Penetrates deeply
- Protected against abrasion
- Spot repairs possible
- Suitable for wood and microporous
|Coverage||20m² per litre|
|Application||Osmo Floor Brush or Osmo Soft Tip Brush|
|Drying Time||12 hours|
|Cleanup||Osmo Brush Cleaner|
|Storage||5 years if can kept dry and firmly shut. Store for 24–36 hours at room temperature before use|
Alternative Osmo Products
|Osmo Polyx Oil Original||
The original, clear hardwax oil designed for most wooden floors & surfaces. Available in Satin, Matt, Semi-Matt and Glossy
|Osmo Polyx Oil Tints||
Use as a base coat - especially recommended for wooden floors.
Alternatively use 2 coats of Polyx Oil Tints for a strong depth of colour on low-traffic areas.
|Osmo Polyx Oil Raw||Use to retain the 'raw', light characteristics of untreated wood|
|Osmo Polyx Oil Anti Slip||Polyx Oil with anti-slip properties - use for stairs or flooring|
|Osmo Polyx Oil Rapid||Cuts drying times in half. Perfect for when time is of the essence.|
|Osmo Polyx Oil Express||Osmo's quickest every drying wood oil|
|Osmo Polyx Oil 2K||Two-part flooring oil for professional, machine application only|
Wood surface must be clean, dry and frost-free (moisture content max. 18%). Osmo Wood Wax Finish Clear Extra Thin is ready to use, please do not thin. Stir well before use. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works.
Fill small cracks, larger joints or holes in wood with Osmo Wood Filler.
If possible, please apply the first coat to all sides before installation. Sand wood surfaces carefully. Begin with coarse sandpaper like Klingspor PS 22 K Velcro Discs x5 (D.I.Y. Pack); final sanding work for flooring 120-150, for furniture P220-240. Before oiling the surface, remove sanding dust with a broom or vacuum.
The finished surface is influenced by the wood‘s natural characteristics. Therefore, a trial application is always required - especially for unfamiliar surfaces.
Osmo Wood Wax Finish Extra Thin can be applied by brushing, wiping, dipping, or spraying in an enclosed unit. Apply evenly along the wood grain with Osmo Soft Tip Brush or a lint-free cloth (e.g. for furniture).
1st coat: Apply thinly. Allow to dry for approx. 30 minutes with good ventilation. Wipe away any excess product. Reapply to unsaturated areas. 2nd coat: apply thinly. Allow to dry for approx. 30 minutes with good ventilation. Wipe away any excess product.
Recommended number of coats: 1 coat for furniture, 2 coats for flooring. When renovating, one coat applied to the clean and dry surface is usually sufficient.
Wood surfaces treated with Osmo Wood Wax Finish Extra Thin are easy to maintain. Remove coarse dirt with a broom or a vacuum cleaner. To clean, add Osmo Wash and Care concentrate to mop water and clean the surface with a damp (not wet!) mop.