sia 1960 S Performance 150mm
The New 1960 S Performance. Outstanding Surface Finish.
Optimised air flows guarantee maximum extraction performance using multi-hole technology. Sanding dust is therefore extracted more efficiently and therefore increasing longevity. The hole design also reduces emissions.
Please Note: The 1960 sia S Performance has replaced 1960 fibotec. Sold in pack sizes of x100 discs.
Areas of Use
Application: Keying of solid wood, Intermediate sanding of varnishes on surfaces and curves, Keying of primers, Primer fillers/bodyfillers, Final sanding as preparation for painting
Material Suitability: Wood, Fibreglass, Plastics, Composites, Laquers, Primers, Paints & Many More.
40 Grit (Pack of x100) = 57 Hole
60 Grit (Pack of x100 = 57 Hole
80 Grit (Pack of x100) = 57 Hole
100 Grit (Pack of x100) = 57 Hole
120 Grit (Pack of x100) = 57 Hole
150 Grit (Pack of x100) = 57 Hole
180 Grit (Pack of x100) = 57 Hole
220 Grit (Pack of x100) = 57 Hole
280 Grit (Pack of x100) = 57 Hole
320 Grit (Pack of x100) = 57 Hole
400 Grit (Pack of x100) = 57 Hole
600 Grit (Pack of x100) = 57 Hole
- Very high stock removal rates and excellent finish
- Performance-enhancing grit mix with ceramic corundum in 40 - 80 grit range
- Minimal clogging thanks to open coating in 220 - 600 grit range
- Extremely long lifetime - Lower abrasive consumption
- Versatile all-round product with an attractive range of options
|Application||Paint, Varnish, Filler, Wood, Others|
|Grain||Mixed grit with ceramic content, Semi-friable aluminium oxide / blue-fired|
|Coating||Electrostatic 40 – P18, Electrostatic open P220 – P600|
Here at AllFinishes we take health and safety seriously and recommend you use the correct protection for the job. Disregarding safety equipment can be damaging and result in long term health conditions. Please check out our Moldex range for high quality respirators and hearing protection.
|Coarse||40||80||Coarse grit sandpaper is a good choice for rough sanding and removing stock quickly, such as sanding the edge of a sticking door with a belt sander.|
|Medium||100||150||Medium grit sandpaper makes a good starting point for most projects, from sanding unfinished wood to removing old varnish.|
|Fine||180||240||Finer grit sandpaper is great for removing the scratches left by coarser grits on unfinished wood and for lightly sanding between coats of paint.|
|Very Fine||320||400||Very fine grit sandpaper is used for light sanding between coats of finish and to sand metal and other hard surfaces.|