Renner YC-M402 is a general water-based hardener that is ideal for Matt topcoats.
Renner YC-M402 is a polyurethane hardener designed for two-pack water-based systems such as Renner YL-M461 White Primer, Renner YL-M461 Clear Sealer and YL-M643. Once activated with the clear basecoats or pigmented primers, it will improve grip for overcoating. It will have a pot life of 3 hours after mixing.
Features
- Hardens matt coatings
- Easy to mix
- Extended pot life
- High solids
- Won't affect sheen
Technical Information
Brand | Renner |
---|---|
Application | N/A |
Coverage (G/M²) | N/A |
Coats | N/A |
Touch Dry | N/A |
Sand Dry | N/A |
Stacking |
N/A |
Mixing Ratio | See Part A |
Activator | N/A |
Thinner | N/A |
Pot Life | 3 hours |
Solids Content % | 70 ± 1 |
Specific Gravity (KG/L) | 1.1 |
Viscosity | N/A |
VOC (G/L) | 393 |
Documents
Please email hello@allfinishes.co.uk if you would like to request an up-to-date technical and/or safety data sheet for this product.
Preparation
Always use a calibrated and graduated clear paint mixing cup to mix the material. They are used for accurately mixing paints, resins and lacquers to the correct mixing ratio.
Application
Although it is possible to blend manually through vigorous stirring, for best results ensure the hardener is added slowly under mechanical stirring conditions. This will ensure optimal consistent results and avoid air bubbles. This is especially important when mixing high Gloss Sheen levels.
Aftercare
When not in use keep the container well closed in dry conditions. Always close tightly after taking the quantity required for catalyst.
Please Note
The introduction of crosslinking agent in a product may result in an increase in viscosity. Do not exceed the maximum blend.