Renner YL-M643 White Primer
RENNER YL-M643 IS A PIGMENTED SINGLE OR TWO PACK WATERBASED PRIMER FOR INTERIOR USE.
YL-M643 is a general purpose two pack basecoat for use underneath pigmented water-based topcoats. It is available in white. Fast drying, it will give excellent filling properties, even colour and good sanding.
Areas of Use
Perfect for working on all wood and MDF on projects such as fitted furniture, doors and turned parts. If the primer is crosslinked with 1% of YC-M402 it will reduce grain raising in MDF, increase thermoplasticity and durability, ideal when manufacturing kitchens & bathrooms.
Features
- Suitable for all kinds of wood
- Good vertical hold
- Long pot life after catalyst
- High pigment & covering power
- Superb sanding ability
Technical Information
Brand | Renner |
---|---|
Application | Conventional Spray, Airmix Spray, Airless Spray, Electrostatic Spray |
Coverage (G/M²) | 150 - 250 per coat |
Coats | 1 - 3 Max. |
Touch Dry | 1 hour |
Sand Dry | 2 hours |
Stacking |
4 hours |
Mixring Ratio | 100:1 |
Activator | YC-M402 |
Thinner | 5% water if necessary |
Pot Life | N/A |
Solids Content % | 50 ± 2 |
Specific Gravity (KG/L) | 1,25 ± 0.05 |
Viscocity | 50” ± 10”(DIN 6 @ 23°C) |
VOC (G/L) | 50 |
Documents
Preparation
We suggest 240-320 grit abrasives. For best results, use stearate abrasives. They provide higher efficiency than normal abrasives. Ensure the surface is completely clean of debris before coating. See our pages for suitable abrasives for water-based products.
Application
With good drying conditions and with good air circulation (20°C with 65% humidity), build can be achieved with just 2 to 3 coats. Each coat of 150 - 250 G/M² with an interval of 60 mins. Under these circumstances it can be sanded after 8 hours. Lower temperatures and higher relative humidity can lead to a longe rdrying time. It is possible to speed up drying using heated ovens. Can be catalysed 1% of YC-M402 for increased thermo-plasticity.
Aftercare
YL-M643 can be overcoated with any of the pigmented Renner Waterborne Topcoats.
Please Note
It is important to understand when switching over from a solvent-based coating system to water-based, to check whether your equipment and apparatus are appropriate or whether you may require more suitable solutions. AllFinishes are able to advise you on electrostatic guns, pumps, seals, silicones, glues, booth treatment products, packaging materials fillers and abrasives. Click the contact us button to get some free technical advice.