Renner YL-M641 White Primer

Please ensure you are selecting all options when adding to your basket
This is a required field.
Price Range:£48.95 - £234.95
Price £48.95
SKU
YL-M641

RENNER YL-M641 IS A PIGMENTED SINGLE OR TWO PACK WATER-BASED PRIMER FOR INTERIOR USE.

Rnner White Primer YL-M641 is a premium two-pack basecoat for use underneath pigmented water-based topcoats. It is available in White. With fast drying time it will give excellent filling properties even colour and good sanding.

Areas of Use

Perfect for working on MDF and masonite products, such as flat parts, frames, baseboards and doors. If the primer is catalised with 4% of YC-M400 it will reduce grain rising in MDF, increase thermoplasticity and durability which is ideal when manufacturing kitchens and bathrooms.


Features

  • Excellent filling primer
  • High barrier properties
  • Long pot life after catalyst
  • High pigment and covering power
  • Superb sanding ability

Technical Information

Brand Renner
Coverage (G/M²) 150 - 250 per coat
Coats 1 - 3 Max.
Touch Dry 2 hours
Sand Dry 8 hours

Stacking

N/A
Mixring Ratio 100:4
Activator YC-M402
Thinner 5% water if necessary
Pot Life N/A
Solids Content % 53 ± 1
Specific Gravity (KG/L) 1.3 ± 0.03
Viscocity 15” ± 5”(DIN 8 @ 23°C)
VOC (G/L) 47

Documents

Tech Data Sheet

Safety Data Sheet


Preparation

We suggest 240-320 grit abrasives. For best results, use stearate abrasives. They provide higher efficiency than normal abrasives. Ensure the surface is completely clean of debris before coating. See our pages for suitable abrasives for water-based products.


Application

With good drying conditions and with good air circulation 20°C  with 65% humidity), build can be achieved with just 2 to 3 coats. Each coat of 150 - 250 G/M² with an interval of 60 mins. Under these circumstances it can be sanded after 8 hours. Lower temperatures and higher relative humidity can lead to a longe rdrying time. It is possible to speed up drying using heated ovens. Can be catalysed 2% of YC-M402 for increased thermo-plasticity.


Aftercare

YL-M641 can be overcoated with any of the pigmented Renner Waterborne Topcoats.


Please Note

It is important to understand when switching over from a solvent-based coating system to water-based, to check whether your equipment and apparatus are appropriate or whether you may require more suitable solutions. AllFinishes are able to advise you on electrostatic guns, pumps, seals, silicones, glues, booth treatment products, packaging materials fillers and abrasives. Click the contact us button to get some free technical advice.

Write Your Own Review
You're reviewing:Renner YL-M641 White Primer