Bedec Aqua Advanced Matt Paint
Bedec Aqua Advanced Matt Paint is a water-based acrylic paint finish for interior and exterior use.
A high-performance interior and exterior satin finish acrylic paint specially formulated for adhesion, durability, and water resistance. It is the perfect topcoat for use on top Bedec Aqua-Advanced Primer Undercoat. It is available in Black and White Matt finish.
Bedec Aqua Advanced Matt Finish is a high quality, quick drying non-yellowing Acrylic / Polyurethane Enamel, for interior and exterior use. Aqua Enamel incorporates Bedec’s unique approach to innovation in water-based technology. It exhibits excellent durability, levelling, colour retention and is quick drying giving a smooth enamel finish in Matt. It has been formulated using the finest raw materials available to the UK market.
Bedec Aqua Advanced Matt Finish is a mid-sheen finish, which means they look like a slightly polished surface and reflect a bit of light and is associated with woodwork. A satin finish on woodwork helps to hide imperfections and gives colour a softer appearance and is perfect on Doors, Skirting Boards, Windowsills, Door Frames and Wooden Window Frames.
Bedec are known for their scientific water-based technology, Aqua-Advanced is a combination of high-quality properties to ensure that your interior and exterior surfaces are protected and hold a fine finish. Aqua-Advanced is available in 4 sheens, including Obliterating Matt. Bedec provide you with the finest formulated technology to the UK market.
Features
- Quick drying
- Non yellowing
- Excellent flow
- Low odour
- High build
Technical Information
Brand | Bedec |
---|---|
Coverage | 13–15m² per litre (depending on substrate and porosity) |
Application | Brush, Roller, Spray |
Drying Time | Touch dry in 30 minutes; dry to recoat in 4 hours @ 23°C |
Coats | 2 coats |
Clean up | Clean directly after using water |
Storage | 2 years if can kept dry and firmly shut, away from direct sunlight |
VOC | 130g/l |
Material | Water-based acrylic |
MPN | QD0002, QD0003, QD0004 |
Documentation
Product Information (68kb PDF)
Safety Data Sheet (134kb PDF)
Bedec Product Range (1.1Mb PDF)
Preparation
Ensure the surfaces you are going to paint, are clean, dry and free from any dirt, dust and any other potential contaminates which may alter the final outcome.
Remove all signs of previous paints, thoroughly rub down with abrasive paper.
Avoid inhaling any dust particles, to help protect you, check out our Moldex range for high quality mask respirators.
Extra precautions must be taken place during surface preparation. Any paint on the surface which may have been applied before the 1960’s may contain harmful lead.
Any bare non-ferrous wood surfaces should be primed before applying your Aqua-Advanced. We can recommend using Aqua Advanced Primer Undercoat for the highest quality outcome by using the two Bedec products together.
Any metal surfaces you want to apply your application on is advised to use Bedec All Metals Primer.
Application
Before the application process, stir thoroughly and check the colour before use.
Test a small area of wood before you apply the whole tin to analyse if the product and colour is something that you are wanting to finish with.
Ensure temperature is above 8°C during application and drying. Do not apply when foggy or damp or likely to rain before the paint has dried.
Do not use any solvents, white spirits or thinners with the product.
You can apply Aqua-Advanced using a brush, roller or spray, depending on what you find comfortable.
Brush — For best results use a good quality synthetic (nylon or polyester) brush, designed for water-based products such as the Purdy Syntox.
Roller — Mini rollers are very good for flush doors, radiators etc. We recommend using the Rodo Tiger Medium Pile Mini Rollers.
Airless Spray — Make sure the Tip size 13–17 thou, Pressure 2000–2500 psi.
Conventional Air Spray or HVLP — recommend a 1.8mm needle nozzle set up.
Its important you apply this in areas that are well ventilated for your own health and drying process.
Aftercare
Always keep this product out of reach from children.
Do not get in your eyes, on the skin or clothing. If you do end up getting paint on your skin, wash off with plenty of water. it does happen that you have paint in your eyes, rinse cautiously with water for several minutes. If consumed, call emergency services immediately. Show the tin or label.
Fully hardened after one week.
Clean equipment immediately after use with warm soapy water. Remove as much product as possible prior to cleaning.
This product does contain 1. 2-Benzisothiazol-3(2H)-one. This may cause an allergic reaction. You can contact your local doctor for details.
Do not empty in to drains or watercourses. Some local authorities have special facilities for disposal or dispensing of waste coatings.
Product Numbers
Manufacturer's Part Numbers (MPN):
QD0002, QD0003, QD0004