Bedec Aqua Advanced Satin Paint
A high-performance interior and exterior satin finish acrylic paint specially formulated for adhesion, durability, and water resistance. It is the perfect topcoat for use on top Bedec Aqua-Advanced Primer Undercoat. It is available in White and Black Satin Finish.
Bedec Aqua Advanced Satin Finish is a high quality, quick drying non-yellowing Acrylic / Polyurethane Enamel, for interior and exterior use. Aqua Enamel incorporates Bedec’s unique approach to innovation in water-based technology. It exhibits excellent durability, levelling, colour retention and is quick drying giving a smooth enamel finish in Satin. It has been formulated using the finest raw materials available to the UK market.
Bedec Aqua Advanced Satin Finish is a mid-sheen finish, which means they look like a slightly polished surface and reflect a bit of light and is associated with woodwork. A satin finish on woodwork helps to hide imperfections and gives colour a softer appearance and is perfect on Doors, Skirting Boards, Windowsills, Door Frames and Wooden Window Frames.
- Excellent flow
- Low odour
- High build
|13–15m² per litre (depending on substrate and porosity)
|Brush, Roller, Spray
|Touch dry in 30 minutes; dry to recoat in 4 hours @ 23°C
|Clean directly after using water
|2 years if can kept dry and firmly shut, away from direct sunlight
Ensure surfaces to be painted are clean dry and free from dust, dirt, grease and wax. Remove all loose and defective paint. For further information contact customer care.
Algae and fungal growths should be treated with fungicidal wash and removed. Allow new galvanised at least one month to weather before painting. Areas under constant water contact such as showers (hot and cold) aren’t recommended for Bedec Aqua-Advanced High Gloss.
Ensure temperature is above 8°C during application and drying. Do not apply when foggy or damp or likely to rain before the paint has dried.
Brush — For best results use a good quality synthetic (nylon or polyester) brush, designed for water-based products such as the Purdy Syntox.
Roller — Mini rollers are very good for flush doors, radiators etc. We recommend using the Rodo Gloss Pile Mini Rollers.
Airless Spray — Make sure the Tip size 13–17 thou, Pressure 2000–2500 psi.
Conventional Air Spray or HVLP — recommend a 1.8mm needle nozzle set up.
Fully hardened after one week.
Clean equipment immediately after use with warm soapy water. Remove as much product as possible prior to cleaning.
Do not empty in to drains or watercourses. Some local authorities have special facilities for disposal or dispensing of waste coatings.
Manufacturer's Part Numbers (MPN):
QB0002/1, QB0002/2.5, QB0002/5, QB0003/1, QB0003/2.5