Sikkens CETOL WP 511 Brush Translucent Primer
Sikkens CETOL® WP 511 Brushable Translucent Primer for Exterior Joinery
Sikkens Wood Coatings are the industrial division of Akzo Nobel and are renowned for their expertise in joinery coatings. Sikkens CETOL® WP 511 is a water-based primer for interior and exterior wood substrates. it's a special designed brushable translucent primer to help block UV damge in certain wood species. It is the perfect product for use underneath fully translucent paint systems such as Sikkens CETOL® WF 910 and Sikkens CETOL® WF 915.
Sikkens CETOL® WP 511 is a water based pure acrylic, brushable Translucent Primer. It creates a very tough and hard wearing primer with UV Protection for the maintenance of exterior and interior wooden parts.
It leaves a smooth surface and is the perfect product to use before brushing one of the Sikkens translucent topcoats Sikkens CETOL® WF 910 and Sikkens CETOL® WF 915.
Sikkens CETOL® WP 511 is ideal for stable (Windows, Outer Doors, Conservatories) hard and soft wood surfaces.
- Suitable for softwood and hardwood
- Ready for use
- Interior or Exterior use
- Perfect under waterbased acrylic topcoats
- Apply by brush or roller
|Brand||Sikkens Wood Coatings|
|Coverage||10m2 per litre|
|Drying Time||Touch dry in 30 minutes, dry to handle in 4–6 hours @ 23°C|
|Coats||2 coats recommended|
|Cleanup||Clean directly after use with water or washing up liquid or with Sikkens ST 830|
|Storage||2 Years if can kept dry and firmly shut|
Product Information (348KB)
Safety Data Sheet (87KB)
Here at AllFinishes we take health and safety seriously and recommend you use the correct protection for the job. Disregarding safety equipment can be damaging and result in long term health conditions. Please check out our Moldex range for high quality respirators and hearing protection.
Perfect sanding is a must for a clean and attractive surface finish.
The wood moisture content for the application of Sikkens coating systems should be between 12–15%.
Imperfect, loose coating must be completely removed. Intact coating should be completely sanded. Raw wood must be impregnated where necessary using Sikkens CETOL® WV 885 BPD.
Always consult the technical data sheet before use. Before use, read the technical data and product information. Even when working with low emission products one should take care of the customary protection measures.
Applying the product too generously and with insufficient ventilation will lead to delays in drying.
Primer coat of Sikkens CETOL® WP 511.
Use Sikkens Kodrin spachtel if necessary if filling is required.
Mid coat of Sikkens CETOL® WF 910/915
Top coat of Sikkens CETOL® WF 910/915
The choice and use of the coating system, especially the colour shade, should also be taken into account. Darker shades can increase the surface temperature (up to 80°C)
Allow to dry for approximately 4–6 hours with good ventilation in between coats. Lower temperatures and/or higher air humidity can increase the drying time.
After 2–3 weeks, the surface is completely and thoroughly hardened.
Wood surfaces treated with Sikkens are easy to maintain.
Remove coarse dirt with a stiff bristle nylon bristle brush. Clean with a mild detergent solution and rinse well with clean water. Allow to dry. A proprietary fungicidal wash may be used where appropriate.