SIA 1950 siaspeed 115mm x 25mm siasoft Roll
SIA 1950 SIASPEED (SIA SOFT) 115MM X 25M ABRASIVE ROLLS Ideal FOR MEDIUM TO FINE SANDING OF PAINTS, PRIMERS & LACQUERS
- Versatile all-round product used in automotive, aerospace and building industries
- Very high stock removal rates and excellent finish
- The open coating in 220 - 600 grit range provides minimal clogging
- Exceptionally long lifetime
- Lower abrasive consumption
- Versatile all-round product with an attractive range of options
- Available in 150 to 1000 grit
SIA 1950 SIASPEED (SIA SOFT) 115MM X 25M ABRASIVE ROLLS Ideal FOR MEDIUM TO FINE SANDING OF PAINTS, PRIMERS & LACQUERS
1950 siaspeed is a versatile all-round product, designed for high stock removal rates, perfect surface quality and long life in applications across a range of industries and substrates. Use in furniture production, building, automotive and aerospace industries for surface treatment of body filler, primer filler, lacquers and paints.
Advantages
|
Industries |
Advantages |
|
Building Interior |
· A versatile all-round product · High performance for stock removal · Longest lifetime · Minimal clogging thanks to open coating in 220 - 600 grit range |
|
Furniture Production |
· Homogeneous sanding finish · Uniform abrasive structure on film · Excellent surface quality · Ideal for highly polishable surfaces |
|
Automotive |
· Performance-enhancing grit mix with ceramic aluminium oxide in 40 - 80 grit range · Minimal clogging thanks to open coating in 220 - 600 grit range · Extremely long lifetime · Lower abrasive consumption · Versatile all-round product with an attractive range of options |
|
Aerospace |
· High-performance abrasives · High performance for stock removal · Longest lifetime · A versatile all-round product · Lower abrasive consumption · Homogeneous sanding finish |
APPLICATIONS Substrates
SIA 1950 siaspeed 115mm x 25m siasoft rolls can be used on the following materials:
Materials:
- Colour
- Primer filler
- Bodyfiller
- Lacquer
- Old lacquer
- Primer coat
- Epoxy primer coat
- Cathodic dip primer coat
- Plastics
- Acrylic glass
- Gelcoat polyester
- Glass-fibre reinforced plastic (GRP)
Please Note: Not suitability for glass sanding, wet sanding and stone grinding.
Industry Applications
|
Industries |
Application |
|
Building Interior |
· Keying or sanding surfaces · Sanding off old paint and varnish · Keying smoothed surfaces · Fine sanding of surfaces · Flatting uneven areas |
|
Furniture Production |
· Preparation for polishing with long/cross belt (stationary) |
|
Automotive |
· Sanding of coatings and impurities · Sanding out unevenness at the edges of repaired surfaces · Flatting of bodyfiller and composite materials · Fine sanding of primer filler · Keying of old and new lacquers · Producing a matt finish on old and new lacquers for blending · Removal of orange peel effect and dust inclusions · Preparation for polishing on high-gloss surfaces |
|
Aerospace |
· Keying of polyesters and composites · Sanding out feather edges, flash rust and stone chips · Shaping of bodyfillers and primer fillers · Keying of new components and factory primers · Sanding of old lacquer · Producing a matt finish on old and new lacquers for blending · Flatting of bodyfiller and primer filler · Removal of orange peel effect and dust inclusions · Preparation for polishing on high-gloss surfaces |
Technical Information
| Grit Type |
Mixed grit with ceramic content: 40 – 80 Semi-friable aluminium oxide / blue-fired: P100 – P400 White aluminium oxide: P500 – P1500 |
| Backing | Paper (FSC_Certified), fim |
| Coating |
Electrostatic: 40 – P180 Electrostatic open: P220 – P600 Special process: P800 – P1500 |
Safety
Here at AllFinishes we take health and safety seriously and recommend you use the correct protection for the job. Disregarding safety equipment can be damaging and result in long term health conditions. We recommend using a Moldex mask.
- Pay attention to the abrasives safety data sheet (available from sia Abrasives)
- Follow the general FEPA safety recommendations
- Use eye and face protection
- Use an effective dust extraction unit or wear a fine dust mask
