Renner YC-M407 is a general purpose Crosslinker for water-based basecoats and topcoats.
Renner YC-M407 is a Crosslinker designed for water-based systems such as Renner YO-**M760 or Renner YO-**C762. Once activated it will reduce stacking times. It will have a pot life of 24 hours after mixing.
Features
- General Crosslinker
- Easy to mix
- Extended pot life
- High solids
- Does not affect Sheen
Technical Information
| Brand | Renner |
|---|---|
| Application | N/A |
| Coverage (G/M²) | N/A |
| Coats | N/A |
| Touch Dry | N/A |
| Sand Dry | N/A |
|
Stacking |
N/A |
| Mixing Ratio | See Part A |
| Activator | N/A |
| Thinner | N/A |
| Pot Life | 24 hours |
| Solids Content % | 70 ± 1 |
| Specific Gravity (KG/L) | 1.1 |
| Viscosity | N/A |
| VOC (G/L) | N/A |
Documents
Please email hello@allfinishes.co.uk if you would like to request an up-to-date technical/safety data sheet for this product.
Preparation
Always use a calibrated and graduated clear paint mixing cup to mix the material. They are used for accurately mixing paints, resins and lacquers to the correct mixing ratio.
Application
Although it is possible to blend manually through vigorous stirring, for best results ensure the hardener is added slowly under mechanical stirring conditions. This will ensure optimal consistent results and avoid air bubbles. This is especially important when mixing high Gloss Sheen levels.
Aftercare
When not in use keep the container well closed in dry conditions. Always close tightly after taking the quantity required for catalyst.
Please Note
The introduction of crosslinking agent in a product may result in an increase in viscosity. Do not exceed the maximum blend.
