Osmo Wood Protector 4006
PRODUCTS RELATED TO THIS ITEM
The Perfect water-resistant base coat, ideal for kitchens and bathrooms.
Use Osmo Wood Protector prior to application of an oil from the Osmo Polyx Oil range. Recommended for use in bathrooms & kitchens (where wooden surfaces will be prone to moisture). Ideal for wood's susceptible to blue stain, such as Pine. Suitable for all interior wood, including kitchen work surfaces, flooring, window frames and joinery.
Features
- For Interior use
- High water repellent and free of organic biocides
- Easy to use
- Suitable for wood and microporous
- Resistant to saliva and perspiration, suitable for children’s toys
Key Information
| Brand | Osmo |
|---|---|
| Coverage | 8.4m² per litre |
| Application | Osmo Soft Tip Brush, Roller, Dip |
| Drying Time | Dry in 24-36 hours @ 23°C. |
| Coats | 1 coat recommended |
| Cleanup | With Osmo Brush Cleaner (free of aromatic compounds). |
| Storage | 5 years if can kept dry and firmly shut. Store for 24–36 hours at room temperature before use |
| VOC | 400g/l |
| Ingredients | Based on natural plant oils and waxes (sunflower oil, thistle oil, carnauba wax and candelilla wax), paraffin, siccatives (drying angets) and water-repellent additives. Dearomatized white spirit (benzene-free). This product fulfils EU regulations (2004/42/EC) according to the VOC content of max. 750 g/l (Cat. A/h (2010)). Detailed declaration of ingredients available upon request. |
| MPN | 4006 Clear |
Documentation
Product Information (618kb PDF)
Safety Data Sheet (254kb PDF)
Preparation
Wood surface must be clean, dry and frost-free (moisture content max. 18%).
Osmo Wood Protector is ready to use, please do not thin.
Stir well before use.
Clean old microporous stains thoroughly.
Old paints and lacquers must be completely removed.
As a general rule, wear a dust mask during sanding works.
Fill small cracks, larger joints or holes in wood with Osmo Wood Filler.
The finished surface is influenced by many factors, including the wood's natural characteristics. Therefore, a trial application is always required, especially for unfamiliar surfaces.
Osmo Wood Protector is compatible with all conventional types of glue and putty (except for products containing silicon).
Application
Apply one time to the clean and dry wood with a Brush (we strongly recommend using the Osmo Soft Tip Brush), Osmo Microfibre Roller or by dipping.
Coat the clean, dry, frost-free wood generously – if possible, on all sides.
Dipping process: approx. 2 minutes dipping time Allow for good ventilation. Top coat should be carried out within one week.
Oils enhance the natural tone of wood (permanent wet effect). Osmo Wood Protector is not a self-priming finish. Within one week, a top coat (with an oil-based Osmo wood finish) should be carried out. When using Osmo Wood Protector on large areas under Osmo One Coat Only HSPLUS, glossy spots may appear because of the extremely high content of solids in this stain. Due to the strongly water-repellent effect, do not coat with water-soluble products (e.g. Interior Wax).
Aftercare
Clean tools with Osmo Brush Cleaner (free of aromatic compounds).
Product Numbers
Manufacturer's Part Numbers (MPN):
4006850105748, 4006850103454, 4006850103461
