revive and restore your exterior wooden surfaces and furniture.
Restores greyed wood back to its original colour and character. Noticeable results in just 30 minutes. Perfect for decking.
Please only use this product on bare wood or wood that has not yet been treated with oil. Also suitable for wood that has not been oiled for a long period of time.
Most exterior wooden surfaces. Including:
- Garden Furniture
- Timber Cladding
- Ideal product for softwood and hardwood garden furniture.
- Feeds and restores the original characteristics in the wood.
- Revives wood that has turned grey due to the exposure of sun and general weathers.
- Penetrates deeply into the wood.
- Easy to apply.
- Odour-free and biodegradable.
- Ideal exterior wood cleaner and reviver.
|Coverage||Up to 10m² per litre|
|Drying Time||Touch dry in 24 hours @ 23°C|
|Drying Time||1 hour
Before you go ahead and apply this product, ensure that you have cleaned the surface from any possible contaminates.
Remove any dirt, grease, mould, algae or moss from the surface with a scraper, hard bristle brush or a stiff broom.
Dampen the wood with clean water before you apply Osmo Wood Reviver Gel.
Please ensure that you always wear gloves and protective clothing. Wear protective eyewear when using this product.
Before you apply this product on a large scale area, always carry out a test patch on the wood to analyse the potential outcome of the product.
Please follow the manufacture’s guidelines and instructions on the container at all times during the application process to ensure results.
Apply a healthy amount of gel generously along the wood grain using a stiff brush, we can recommend using Osmo Decking Cleaning Brush. The Osmo Decking Cleaning Brush is manufactured with firm bristles that are ideal for multi-purpose cleaning and can be used for various different cleaning jobs around the garden and exterior areas.
After approximately 20 minutes, scrub the area of application with your brush or an abrasive pad.
Rinse off the Power Gel with plenty of clean water.
Allow the area 24 to 48 hours for the colour of the timber to return to its original state.
Depending on the extreme exposure, you may need to repeat this process for a second application.