- Particulate filters with pleated Filter Technology: significantly reduce breathing resistance
- Suitable for Series 7000 and 9000 Masks
- EasyLock ® Filters with bayonet connector
- Low breathing resistance
- Particulate filters can either be connected to the gas cartridges or directly with the mask body.
- Adaptors and particular pre-filters are not necessary
- Tested and certified to EN 143:2000 +
EasyLock FILTERS for PROTECTION AGAINST GAS, VAPOUR & DUST
9430 EasyLock pre-assembeld filters have been designed to fit the Moldex 7000 Series Twin Half Mask and the Moldex 9000 Series Twin Full Face Mask. The EasyLock system is intuitive and simple use. The filters can be partnered with the gas cartridges, or directly with the mask body. No adaptors and particular pre-filters are necessary, simpler logistics - 30% less parts.
Type ABEK combination cartridge protects against: Organic vapours and gases, inorganic vapours and gases, sulphur dioxide and other acidic vapours and gases, ammonia and ammonia derivatives vapours and gases. The filters are Tested and certified to EN 143:2000 +.
|
Class |
Maximum use level with half mask Series 7000 |
Maximum use level with full mask Series 9000 |
|
P1 R |
4 x WEL * Fine dusts, fumes, water and oil-based mists/aerosols |
4 x WEL * Fine dusts, fumes, water and oil-based mists/aerosols |
|
P2 R |
10 x WEL * Hazardous fine dusts, water and oil-based mists/aerosols, P2 R + P3 R + Ozone biological agents of risk group 2 |
10 x WEL * Hazardous fine dusts, water and oil-based mists/aerosols, biological agents of risk group 2 |
|
P3 R |
20 x WEL * Harmful and carcinogenic dusts, water and oil-based mists/ aerosols, biological agents of risk group 2 and 3, CMR-substances |
40 x WEL * Harmful and carcinogenic dusts, water and oil-based mists/ aerosols, biological agents of risk group 2 and 3, CMR-substances |
|
P2 R + P3 R + Ozone |
In addition to the particle filtering efficiency these filters also offer protection against ozone; at 1000ppb ozone a maximum use time of 8h. |
|
SERVICE LIFE OF THE CARTRIDGES AND PARTICULATE FILTERS
If you can smell gases or vapours when you use the gas filters, they are exhausted and must be replaced (no later than 6 months after the original packaging is opened).
Replace the particulate filter if the breathing resistance increases dramatically. The filters must always be replaced in pairs.
You must adhere to the use-by-date.
Test the fit and seal of your masking witht the in-house the Moldex 0103 Fit Test Kit to make sure your mask is fitted correctly.
STORAGE
Keep the filters sealed in a dry, uncontaminated environment. Protect them against sunlight and sources of heat.
FILTERS QUALIFY AS HAZARDOUS WASTE
They must be disposed of in accordance with the applicable waste disposal regulations. Information is provided by your local responsible authority
CERTIFICATION
The EasyLock® filters meet the requirements of EN 14387:2004+ A1:2008 and EN 143:2000 + A1:2006 and are CE-marked in accordance with the requirements of European Directive 89/686 EEC. The Institut für Arbeitsschutz IFA in St Augustin (0121) in Germany is the body responsible for both type examination (article 10) and monitoring of products (article 11B). The products are manufactured in an ISO 9001 certified plant. The Institut fr Arbeitsschutz IFA in St Augustin (0121) in Germany is the body responsible for both type examination (article 10) and monitoring of products (article 11B). The products are manufactured in an ISO 9001 certified plant.
IMPORTANT INFORMATION FOR USERS CAUTION:
AX filters must only be used once. Low-boiling gases ( 65C) generally bind poorly with gas filters. This may result in shorter periods in service.
Please refer to the relevant national regulations for information about the maximum permissible application concentrations and times for the individual compounds.
Only use with vapours with good warning properties.
AX filters do not offer adequate protection against various low-boiling gases.
If you have any questions about how to use AX filters, please contact Moldex or Rapid-Fire Supplies.
The filter 9730 ABEK1Hg P3 have a maximum use time of 50h against mercury
