EasyLock FILTERS for PROTECTION AGAINST GAS, VAPOUR & DUST
Protect against organic, inorganic, acid and ammonia gases and vapours. Fits Moldex 7000 series half face masks and 9000 full face respirators
9400 ABEK1 EasyLock filter cartridges have been designed to fit the Moldex 7000 Series Twin Half Mask and the Moldex 9000 Series Twin Full Face Mask. The EasyLock system is intuitive and simple use. The filters can be partnered with the gas cartridges, or directly with the mask body. No adaptors and particular pre-filters are necessary, simpler Logistics - 30% less parts
Type ABEK combination cartridge protects against: Organic vapours and gases, inorganic vapours and gases, sulphur dioxide and other acidic vapours and gases, ammonia and ammonia derivatives vapours and gases.
Technical Information
|
Class |
Maximum use level with half mask Series 7000 |
Maximum use level with full mask Series 9000 |
|
P1 R |
4 x WEL * Fine dusts, fumes, water and oil-based mists/aerosols |
4 x WEL * Fine dusts, fumes, water and oil-based mists/aerosols |
|
P2 R |
10 x WEL * Hazardous fine dusts, water and oil-based mists/aerosols, P2 R + P3 R + Ozone biological agents of risk group 2 |
10 x WEL * Hazardous fine dusts, water and oil-based mists/aerosols, biological agents of risk group 2 |
|
P3 R |
20 x WEL * Harmful and carcinogenic dusts, water and oil-based mists/ aerosols, biological agents of risk group 2 and 3, CMR-substances |
40 x WEL * Harmful and carcinogenic dusts, water and oil-based mists/ aerosols, biological agents of risk group 2 and 3, CMR-substances |
|
P2 R + P3 R + Ozone |
In addition to the particle filtering efficiency these filters also offer protection against ozone; at 1000ppb ozone a maximum use time of 8h. |
|
SERVICE LIFE OF THE CARTRIDGES AND PARTICULATE FILTERS
- If you can smell gases or vapours when you use the gas filters, they are exhausted and must be replaced (no later than 6 months after the original packaging is opened).
- Replace the particulate filter if the breathing resistance increases dramatically. The filters must always be replaced in pairs.
- You must adhere to the use-by-date.
STORAGE
Keep the filters sealed in a dry, uncontaminated environment. Protect them against sunlight and sources of heat.
FILTERS QUALIFY AS HAZARDOUS WASTE
They must be disposed of in accordance with the applicable waste disposal regulations. Information is provided by your local responsible authority
CERTIFICATION
The EasyLock® filters meet the requirements of EN 14387:2004+ A1:2008 and EN 143:2000 + A1:2006 and are CE-marked in accordance with the requirements of European Directive 89/686 EEC. The Institut für Arbeitsschutz IFA in St Augustin (0121) in Germany is the body responsible for both type examination (article 10) and monitoring of products (article 11B). The products are manufactured in an ISO 9001 certified plant. The Institut fr Arbeitsschutz IFA in St Augustin (0121) in Germany is the body responsible for both type examination (article 10) and monitoring of products (article 11B). The products are manufactured in an ISO 9001 certified plant.
IMPORTANT INFORMATION FOR USERS CAUTION:
AX filters must only be used once. Low-boiling gases ( 65C) generally bind poorly with gas filters. This may result in shorter periods in service.
Please refer to the relevant national regulations for information about the maximum permissible application concentrations and times for the individual compounds.
Test the fit and seal of your masking witht the in-house the Moldex 0103 Fit Test Kit to make sure your mask is fitted correctly.
