- Particulate filters with pleated Filter Technology: significantly reduce breathing resistance
- Suitable for Series 7000 and 9000 Masks
- EasyLock ® Filters with bayonet connector
- Low breathing resistance
- Particulate filters can either be connected with the gas cartridges or directly with the mask body.
- Adaptors and particular pre-filters are not necessary
- 9030 Particulate filters tested and certified to EN 143:2000 + A1:2006
EasyLock FILTERS for PROTECTION AGAINST GAS, VAPOUR & DUST
Moldex 9030 P3R Filters have been designed to prioritise the wearer’s safety while keeping things simple. The refined design ensures useability and adaptability without needless complexity. This use-freely approach is achieved without compromising safety.
The AirWave long-life pleated filter technology provides the particle filters with an extremely low breathing resistance, helping to improve comfort while reducing fatigue.
EasyLock filters can be mounted directly onto the 7000 and 9000 series mask bodies with its handy bayonet connector. The filters can be used in combination with EasyLock gas filters without an adapter and used as a particle pre-filter.
PARTICULATE FILTER CLASS EN 143:2000 + A1:2006
Class |
Maximum use level with half mask Series 7000 |
Maximum use level with full mask Series 9000 |
P1 R |
4 x WEL * Fine dusts, fumes, water and oil-based mists/aerosols |
4 x WEL * Fine dusts, fumes, water and oil-based mists/aerosols |
P2 R |
10 x WEL * Hazardous fine dusts, water and oil-based mists/aerosols, P2 R + P3 R + Ozone biological agents of risk group 2 |
10 x WEL * Hazardous fine dusts, water and oil-based mists/aerosols, biological agents of risk group 2 |
P3 R |
20 x WEL * Harmful and carcinogenic dusts, water and oil-based mists/ aerosols, biological agents of risk group 2 and 3, CMR-substances |
40 x WEL * Harmful and carcinogenic dusts, water and oil-based mists/ aerosols, biological agents of risk group 2 and 3, CMR-substances |
P2 R + P3 R + Ozone |
In addition to the particle filtering efficiency these filters also offer protection against ozone; at 1000ppb ozone a maximum use time of 8h. |
SERVICE LIFE OF THE CARTRIDGES AND PARTICULATE FILTERS
If you can smell gases or vapours when you use the gas filters, they are exhausted and must be replaced (no later than 6 months after the original packaging is opened).
Replace the particulate filter if the breathing resistance increases dramatically. The filters must always be replaced in pairs.
You must adhere to the use-by-date.
Keep the filters sealed in a dry, uncontaminated environment. Protect them against sunlight and sources of heat.
Filters qualify as hazardous waste. They must be disposed of in accordance with the applicable waste disposal regulations. Information is provided by your local responsible authority
IMPORTANT INFORMATION FOR USERS CAUTION
AX filters must only be used once. Low-boiling gases ( 65C) generally bind poorly with gas filters. This may result in shorter periods in service.
Please refer to the relevant national regulations for information about the maximum permissible application concentrations and times for the individual compounds.
Only use with vapours with good warning properties.
Test the fit and seal of your masking witht the in-house the Moldex 0103 Fit Test Kit to make sure your mask is fitted correctly.
CERTIFICATION
The EasyLock® filters meet the requirements of EN 14387:2004+ A1:2008 and EN 143:2000 + A1:2006 and are CE-marked in accordance with the requirements of European Directive 89/686 EEC. The Institut für Arbeitsschutz IFA in St Augustin (0121) in Germany is the body responsible for both type examination (article 10) and monitoring of products (article 11B). The products are manufactured in an ISO 9001 certified plant. The Institut fr Arbeitsschutz IFA in St Augustin (0121) in Germany is the body responsible for both type examination (article 10) and monitoring of products (article 11B). The products are manufactured in an ISO 9001 certified plant.