Osmo Uviwax

A durable traditional wax-like finish with UV protection.

Osmo Uviwax is a self-priming finish designed for interior wall and ceiling panelling, as well as cabinets and doors. It protects the lignin in the wood against harmful UV rays, reducing the natural yellowing of the wood over time and helps to maintain the natural, light-coloured wood tone for a greater interval.

FEATURES

• A unique formula that dries to a UV resistant, wax-like finish
• Designed for interior wood including wooden doors, panelling and cabinets
• All-in-one product with no need to over-coat
• Does not flake, peel, blister or crack
• Dries to a non-yellowing, satin finish
• Safe for humans, animals and plants when dry
• Water-based

Preparation

Wooden surfaces must be clean, dry and frost-free (moisture content max. 18%).

• Aged paints and lacquers need to be fully removed back to bare wood
• Old microporous coatings such as oils and waxes should be thoroughly cleaned or removed
• Lightly sand wood with an abrasive if required
• For furniture, sand with P180-240 grit
• Make sure to remove all traces of sanding dust with a brush or vacuum cleaner prior to application of Osmo Uviwax
• Degrease very resinous woods (e.g. Larch) with Osmo Brush Cleaner and Thinner

Application

We recommend to do a test area before starting any project to assess product suitability and final finish. Follow the manufacturer's instructions on the tin at all times.

Only apply in temperatures of above 10°C. Osmo Uviwax UV Protection is ready to use, no thinning required. Stir well before and periodically during use.

• Apply directly to raw wood with an Osmo Soft Tip Brushor a soft, lint-free cloth
• Spread thinly and evenly along the wood grain
• Allow to dry for approx. 3-4 hours with good ventilation
• If necessary, lightly sand or denib* the surface with a P320 - P360 sandpaper before applying the second coat

1. Apply second coat in same manner as first

*To remove nibs trapped in a layer of paint or other finish

Aftercare

Regular Cleaning

Osmo Uviwax can be cleaned with a slightly dampened lint-free cloth. Avoid using large amounts of water, household detergents and steam cleaners as these may degrade the finish or damage the wood.

Deep Cleaning

For stubborn marks, stains and scuffs, clean with Osmo Wash and Care (8016).

Renovation and Repair

Stubborn stains and marks can be lightly sanded with a scotch pad or fine abrasive, to remove the damage, before re-applying a thin coat of UV Protection Wax to the affected area. One coat applied to the clean and dry surface is usually sufficient.