Osmo Decking Oil Colour Protection
A coloured Satin Finish for your Timber Decking, Garden Furniture and Privacy Screens.
Enhance, protect and maintain your softwood and hardwood decking boards. For clear decking oil please see Osmo Decking Oil Teak Clear 007.
- Pressure impregnated Pine
- Douglas Fir
- Microporous finish - allows the wood to breathe
- Weather and UV resistant (Except from 007 - Teak - Clear)
- Recoat without sanding or priming
- Easy, seemless application
- Workable finish whilst coating
- Extends intervals of renovation significantly
- Finish is safe for humans, animals and plants and is suitable for children‘s toys as per EN 71.3 (European norm)
- Saliva-resistant and sweatproof according to DIN 53160 (German industrial norm)
|Coverage||24m² per litre|
|Application||Osmo's specially designed Decking Brush|
|Drying Time||Touch dry in 10–12 hours @ 23°C|
2 coats recommended.
Decking = Decking Oil as a base coat and Osmo Anti-Slip Decking Oil as a top coat.
Screens = Decking Oil as a base coat and Osmo UV Protection Oil as a top coat.
|Cleanup||With Osmo Brush Cleaner|
|Storage||5 years if can kept dry and firmly shut. Store for 24 –36 hours at room temperature before use|
|Ingredients||Based on natural plant oils (sunflower oil, soya oil, thistle oil and linseed oil), siccatives (drying agents) and additives, biocidal active ingredient: Propiconazole. Dearomatized white spirit (benzene-free).|
Prior to initial treatment:
Hard wood with a high natural wood extractives content needs to weather off (for at least 4 weeks). Alternatively clean with Osmo Brush Cleaner and Thinner (degreaser).
Resinous wood (Larch or Douglas Fir etc.) needs to weather off for at least 6 weeks.
Pressure-impregnated wood (Massaranduba, Bangkirai or Garapa need to weather off for at least 3 months.
Use Osmo Wood Reviver Power Gel to clean the wood surface. This will remove grey wood cells before renovating the area.
Wood surface must be clean, dry and frost-free (moisture content max. 20%)
Osmo Decking Oil is ready to use - please do not thin.
Thoroughly clean or lightly sand old microporous stains. Ensure old varnises are compeltely removed.
Aleays wear a dust mask when sandng.
Please apply base coat to all sides before installation.
Pre-treat surface with one coat of Osmo WR 4001 for additional protection against blue stain, rot and insect attack.
Please carry out a trial applicaton. The finished surface is influenced by many factors, including the wood's natural characteristics.
We recommend using Osmo Decking Brush. Tailor-made for decking - allowing you to apply the finish whilst standing.
Decking Oil can also be applied using a stiff brush (Osmo Soft Tip Brush) or a lint free cloth.
Apply thinly and evenly.
Allow for good ventilation while drying.
Then apply the second coat - also thinly.
Allow to dry for approx. 12 hours with good ventilation.
Then apply the second coat.
For especially mechanically loaded areas (such as decking) we recommend checking the finish at least once a year. Recoat the surface with the suitable finish.