Bedec Interior-Flex Elastomeric Emulsion Paint
PRODUCTS RELATED TO THIS ITEM
It is a uniquely designed product that bridges hairline cracks and flexes with the substrate where cracking has occurred. The paint has significant movement in comparison with conventional matt emulsion.
Bedec Interior-Flex is available in white and magnolia as standard colours.
Areas of Use
Bedec Interior-Flex is perfect for interior ceilings and walls in living rooms, dining Rooms, bedrooms, bathrooms, kitchens, home offices, nurseries, cloakrooms and washrooms
Features
- Smooth matt finish
- Fine crack bridging
- Flexible, microporous and breathable
- Wipeable when dry
- Excellent coverage
- Water-based; low VOC
Technical Information
| Brand | Bedec |
|---|---|
| Coverage | Approximately 10m² per litre depending on substrate and porosity |
| Application | Brush, Roller, Spray |
| Drying Time | Touch dry in 2 hours. Dry to recoat 4 hours @ 23°C |
| Coats | 2 Coats |
| Cleanup | Clean directly after using water |
| Storage | 2 years if can kept dry and firmly shut, away from direct sunlight |
| VOC | 30g/l |
| MPN | Water Based Acrylic |
Documentation
Product Information (165kb PDF)
Safety Data Sheet (199kb PDF)
Preparation
Stir thoroughly, check colour before use. Apply by brush roller or spray. Do not apply at temperatures below 8°c.
Ensure all surfaces are free from oil, grease, dirt, dust and loose particles. On existing painted surfaces remove all loose and flaking paint and rub down with abrasive paper where necessary.
Areas affected by mould should be treated with a suitable fungicidal wash
Application
On plasterboard or any porous substrate, the first coat should be thinned with approximately 30% clean water.
After preparation, brush neat Interior-Flex into hairline cracks and allow to dry. Apply one or two full coats over the whole area as required. Larger cracks or voids will need filling with a flexible filler.
Aftercare
Clean equipment immediately after use with warm soapy water. Remove as much product as possible prior to cleaning.
Do not empty in to drains or watercourses. Some local authorities have special facilities for disposal or dispensing of waste coatings.
Product Numbers
Manufacturer's Part Numbers (MPN):
RAH003/2.5, RA0002/2.5, RAH003/5, RA0002/5
