Liberon Ring Remover 125ml
Liberon Ring Remover, Helps To Lift & Remove Ring Stains.
AllFinishes presents to you Liberon. A traditional superior range of wood and surface finishes that have been preserving and protecting British floors since 1912. With high advanced technology, Liberon is unbeatable in quality and are optimised for durability, quick drying with the perfect finish.
Liberon Ring Remover will remove the majority of white water marks. Also available to use on heat marks from highly polished finishes, which includes, lacquers, varnishes, French polishes and most modern hard finishes.
Liberon Ring Remover will remove the majority of white water marks that may have been left from general household activities. This product is also available to use on heat marks from highly polished finishes, which includes, lacquers, varnishes, French polishes and most modern hard finishes.
If you are wanting to remove marks from wax surfaces, you may use Liberon Wax and Polish Remover, which helps remove stains and marks with ease. Darker marks made from water or heat may indicate damage to the actual wood, rather than it being a stain that can easily be removed. In this case, the finish may need to be completely stripped back and removed with the recommended Liberon Fine Wood Stripper. The finish may need to be completely removed so the bare wood can be treated.
- Strong solution to remove most white water and heat marks left on polished surfaces
- Suitable and well adaptable to use for varnishes, French polishes and lacquers.
- Safe to use on Teak.
- Non-colouring properties.
- Removes and revives most finishes, leaving a shine.
|Coverage||10-12m² per litre|
|Storage||Always store in dry conditions with the lid firmly shut in temperatures above 5°C. Keep out the way of children.|
|VOC||High, its recommend to use in well ventilated areas. Please protect yourself with our Moldex mask respirator range.|
Please check the Safey Data sheet for ingredients.
Product Information (39kb PDF)
Safety Data Sheet (32.3kb PDF)
Furniture Care Guide (3.16MB PDF)
Before applying Liberon Ring Remover, clean the area you are wanting to treat and apply free from any dirt and dust to ensure that the Ring Remover is going to work with results.
Always test the product on a spare area of wood for the final colour and what the end result will look like.
Due to its high solvent formulations, its recommend to use in well ventilated areas. Please protect yourself with our Moldex mask respirator range, disregarding health risks can lead to long term health problems.
Shake the product well before using.
Apply the solution with a clean cotton Lint-free cloth and rub the area with pressure in a circular motion over the mark until it is fully removed from the surface.
Once you have cleaned and removed the mark, buff the area with a clean, dry cotton lint-free cloth.
Apply wax or polish as normal.
For areas which are intensely marked and stained, you can use the product with Liberon Steel Wool, Ultra Fine Grade 0000. Once you have used the steel wool process, you can then buff the area using a clean cotton lint-free cloth.
Once the area is cleaned. and the surface has lost some of its finish, you can always re-wax the area using Liberon Wax Polish Black Bison Paste. This is a great wax polish as it can be used on all types of wood, treating and protecting the wood.
Due to its contents, it can be flammable to ignitions like smoking.
Keep out the way from children.
If consumed, please seek medical advice immediately and show the container or label, do no induce vomiting.
Manufacturer's Part Numbers (MPN):