Liberon Wax & Polish Remover, High Quality Formula.
AllFinishes presents to you Liberon. A traditional superior range of wood and surface finishes that have been preserving and protecting British floors since 1912. With high advanced technology, Liberon is unbeatable in quality and are optimised for durability, quick drying with the perfect finish.
Liberon Wax and Polish Remover is a high solvent based remover which will take effect on most finishes. This product can be used for old and new wooden furniture.
Liberon Wax and Polish Remover is a strong and high quality product which removes existing old waxes, dirt, smoke, grime, grease and everyday uses. This can be used on antique and modern wooden furniture for interior wood work, from doors to beams, to dado rails and banisters.
Liberon Wax and Polish Remover can be applied without harming the original finish, with its unique formula, it should not raise the grain or lift veneers, making it suitable and easy to use for delicate wooden surfaces. It's important to understand that this product is not suitable to use on built up surfaces of wax or grime on top of water-based varnishes.
If you are wanting to remove varnish and paint finishes, we recommend you use Liberon Fine Wood Stripper. Its designed to remove old varnishes and paint finishes on all wood and metal surfaces. Holding strong removal properties but still allows to be gentle to the most fragile wood surfaces as no heavy scrapping is required.
- Allows antiques and other furniture wooden surfaces ready for any sort of re-finishing.
- Safe to use on majority of finishes
- Removes old wax, dirt, grease, smoke, grime and polish, very universal.
- High VOC, please wear suitable clothing and protect yourself with our high quality Moldex range.
- Can be used on varnishes, lacquers, oil finishes and French Polishes.
- Effective, solvent-based solution remover for interior furniture.
|Coverage||2-3m² per 250ml|
|Application||Steel wool or lint-free cloth|
|Drying Time||Minimum 6 hours|
|Storage||Always store in dry conditions with the lid firmly shut in temperatures above 5°C. Due to the solvent based ingredients, its recommend that you keep this product out of the reach of children and any sort of flame ignitions like smoking with its flammable contents.|
|VOC||High, its recommended to wear suitable clothing and product yourself with our high quality Moldex range of mask respirators.|
Please check the Safey Data sheet for ingredients.
|MPN||002540, 002532, 002522, 013993|
Do not pour the solution into plastic containers or use a plastic or vinyl surfaces.
This product is high in VOC so before using the formula, its recommended to wear suitable clothing and product yourself with our high quality Moldex range of mask respirators.
Use this product in well ventilated areas to allow air flow and protect you from solvents.
Before applying the product, always do a test patch to see whether the product is right for the final finish and result.
Apply and squeeze the product out onto the surface and gently wash the surface, going with the wood grain where it's possible to do so. For the best results using this product, we recommend using Liberon Steel Wool grade 0000. With the Ultra Fine Steel Wool, you are able to sqeeuze a small amount into the steel wool and apply as normal.
Give yourself a few minutes for the wax and polish remover to penetrate into the wood, then whilst the surfaces is still slightly wet use a clean cotton lint-free cloth to wipe and remove any old softened wax that appears on the surface.
Repeat this process again until all of the old wax and polish is removed from the surface
Once you have completed these steps, allow 24 hours for the treated area to touch dry conditions before re-finishing.
The surface can be re-finished with a suitable Liberon product to maintain the brand connection or easily use a similar finishing product from any alternative brand that you desire.
Due to the solvent based ingredients, its recommended that you keep this product out of the reach of children and any sort of flame ignitions like smoking with its flammable substances.
Exposed to skin may cause dryness or cracking, wear gloves and suitable clothing.
Do not swallow the product as it may cause long-term lung damage. Do not induce vomiting, seek immediate medical advice and show the container or label of this product.
Do not empty into drains.
Manufacturer's Part Numbers (MPN):
002540, 002532, 002522, 013993
3282390003220, 3282390000946, 3282390000939, 5022640001600