Liberon Palette Wood Dye
PRODUCTS RELATED TO THIS ITEM
Liberon Palette Wood Dyes are suitable for dying and adding colour to all interior wood work around the home. The Wood Dye is designed to leave the wood grains visible to hold the natural beauty within the wood. Palette Wood Dyes are suitable for soft and hardwoods and not restricted to only one type of wood specie.
Palette Wood Dye has been EN 71 Part 3 Approved, meaning that this product is safe enough to be applied on children’s wooden toys and furniture. The Wood Dye can be applied on multiple surfaces making the Liberon Palette Wood Dye a universal product being able to use on large and small surfaces, such as furniture, floors, doors, frames, cupboards and toys. With quick drying properties and easy to use functionalities, Palette Wood Dye comes in a range of wood shades.
The colours can be mixed to vary the shade of your wood or preferred tone. Palette Wood Dye is available in 13 colours.
Features
- Simple application process.
- A water-based dye
- Can be applied using a brush or a foam applicator.
- All colours available are suitable to mix together to create colours and shades that match your wood.
- Contains low VOC
- Suitable for floors, furniture, doors etc.
- Leaves the grain visible .
- Suitable to apply on both hard and soft woods
- Quick drying time between each coat.
- EN 71 approved – meaning it’s safe to use for toys
- Can be mixed with Liberon Natural Finish Varnishes
Technical Information
| Brand | Liberon |
|---|---|
| Coverage | 2-4m² per 250ml |
| Application | Brush or foam applicator |
| Drying Time | Minimum 2 hours |
| Coats | 2 coats recommended |
| Storage | Always store in dry conditions with the lid firmly shut. Keep out the way of children. |
| VOC | Low VOC |
| Ingredients |
Please check the Safey Data sheet for ingredients. |
| MPN | 014333, 014372, 014401, 014338, 014377, 014406, 014339, 014378, 014332, 014371, 014331, 014370, 014399, 014337, 014376, 014405, 014335, 014374, 014308, 014347, 014386, 014340, 014379, 014334, 014373, 014336, 014375, 014309, 014348, 014387, 014310, 014349, 014388 |
Documents
Preparation
Before starting the job, ensure you are equipped with right amount of Liberon Spirit Wood dye.
Test an area of wood with the dye first before starting out the job to ensure that the final finish is right for the wood. The colour bar may not be a true representation of the actual colour.
If one or more tin is required, mix the tins together in one large container to uniform and marry the colours together.
Before applying the Palette Wood Dye, sand the surfaces thoroughly and remove any dust that may have been left behind.
Do not mix water-based dyes with spirit dyes.
Caution must be taken when using water based finishes over Liberon Palette Wood Dye. Keep brush strokes to a minimum as over brushing may lift out the colour.
If you need to remove any varnishes that may have been on the surface previously, you can use Liberon Fine Wood Stipper, and Liberon Wax & Polish Remover for wax finishes.
Any imperfections in the wood? Then you can use Liberon Wood Filler to fill in cracks and gaps you may have.
Safety
Here at AllFinishes we take health and safety seriously and recommend you use the correct protection for the job. Disregarding safety equipment can be damaging and result in long term health conditions. Please check out our Moldex range for high quality respirators and hearing protection.
Application
Before application, shake well before use.
Wear gloves and protective clothing.
If your job in hand require the mixture of tins, make sure to uniform colour.
Use a brush or foam applicator.
Work with the grain of the wood, wherever possible, allow the dye to penetrate.
Remove any excess dye that may be left with a clean cotton cloth.
A second coat may be applied after 2 hours if a stronger colour is required. More than two coats of dye may affect the final finish.
Aftercare
Keep Liberon Palette Wood Dye in distance from the reach of children.
Do not leave the product in any direction of ignition – No smoking near the product.
Do not leave the tin empty into nearby drains.
Always wear suitable protective clothing and gloves when in the process of using the application.
Ensure you use the application in well ventilated areas.
Do not allow the tin to freeze.
Product Numbers
Manufacturer's Part Numbers (MPN):
014333, 014372, 014401, 014338, 014377, 014406, 014339, 014378, 014332, 014371, 014331, 014370, 014399, 014337, 014376, 014405, 014335, 014374, 014308, 014347, 014386, 014340, 014379, 014334, 014373, 014336, 014375, 014309, 014348, 014387, 014310, 014349, 014388
GTIN:
5022640000214, 5022640003345, 5022640003628, 5022640000276, 5022640003390, 5022640003673, 5022640000283, 5022640003406, 5022640000207, 5022640003338, 5022640000191, 5022640003321, 5022640003604, 5022640000269, 5022640003383, 5022640003666, 5022640000245, 5022640003369, 5022640000306, 5022640003420, 5022640003703, 5022640000290, 5022640003413, 5022640000221, 5022640003352, 5022640000252, 5022640003376, 5022640000313, 5022640003437, 5022640003710, 5022640000320, 5022640003482, 5022640003727