Sikkens RUBBOL WF 3310-04-25 Semi-Matt Opaque Wood Paint
RUBBOL® WF 3310-04-XX 1K WATERBORNE MID- AND TOPCOAT, OPAQUE
Sikkens RUBBOL® WF 3310-04-XX is a water-based, pure acrylic brushable Opaque mid and topcoat. IIt creates a very tough and hardwearing finish that combines the advantages of the technology and stunning colour pigments in one product.
Sikkens RUBBOL WF 3310-04-XX® leaves a smooth surface and is resistant to UV light, dirt and moisture. This is the ideal product to protect and add value to exposed wooden surfaces.
Available in the RAL colour range. To order a RAL colour which is not listed, please select "bespoke" and enter your colour reference in the text field.
Please note this product was previously named Sikkens WF 310
Features
- Suitable for softwood and hardwood
- Available in the Sikkens 4041 Color Concept, RAL Classic, NCS or any desired colour shades
- Ready to use on external and internal wood
- Protects wood surfaces drying within 4 hours
- Apply by brush or roller
- Great hiding power
- Good levelling
- Highlly weather resistance
Technical Information
| Brand | Sikkens Wood Coatings |
|---|---|
| Coverage | 10m2 per litre |
| Application | Brush, |
| Drying Time | Touch dry in 30 minutes, dry to handle in 4–6 hours @ 23°C |
| Coats | 2 coats recommended |
| Cleanup | Clean directly after use with water or washing up liquid or with Sikkens ST 830 |
| Storage | 2 Years if can kept dry and firmly shut |
| VOC | 80g/l |
| Ingredients | Pure Acrylic |
Coating system
| Impregnation | Cetol WP 567 BPD Cetol WP 540 |
| Primer | Rubbol WP 105 |
| Mid coat | WF 3310-04-xx |
| Top coat | WF 3310-04-xx |
Documentation
Product Information (348KB)
Safety Data Sheet (176KB)
Product Updates
|
New Product |
Old Product |
|
WF 3310-04-XX |
WF 310 |
Safety
Here at AllFinishes we take health and safety seriously and recommend you use the correct protection for the job. Disregarding safety equipment can be damaging and result in long term health conditions. Please check out our Moldex range for high quality respirators and hearing protection.
Preparation
Perfect sanding is a must for a clean and attractive surface finish.
The wood moisture content for the application of Sikkens coating systems should be between 12–15%.
Imperfect, loose coating must be completely removed. Intact coating should be completely sanded.
Application
Always consult the technical data sheet before use. Before use, read the technical data and product information. Even when working with low emission products one should take care of the customary protection measures.
Applying the product too generously and with insufficient ventilation will lead to delays in drying.
Primer coat of Sikkens RUBBOL® WP 105.
Use Sikkens Kodrin spachtel if necessary if filling is required.
Mid coat of Sikkens RUBBOL® WF 3310-04-XX
Top coat of Sikkens RUBBOL® WF 3310-04-XX
The choice and use of the coating system, especially the colour shade, should also be taken into account. Darker shades can increase the surface temperature (up to 80°C)
Allow to dry for approximately 4–6 hours with good ventilation in between coats. Lower temperatures and/or higher air humidity can increase the drying time.
After 2–3 weeks, the surface is completely and thoroughly hardened.
Areas of Use
It is ideal for protecting all stable (windows, outer doors, conservatories, sheds, summerhouses) hard and softwood surfaces. It can also be used for the maintenance of wooden components previously treated in Sikkens RUBBOL® WF 3310-06-25. If the wooden components are accidentally damaged in transit or installation, it is possible to remedy small damages with Sikkens RUBBOL® WF 3310.
It has been matched and specified for lustre and colour shade to the aformentioned spray products and can be applied by cleaning the damaged old coating layer and sanding gently, then brushing the coating once or twice in the desired colour shade.
Aftercare
Wood surfaces treated with Sikkens RUBBOL® WF 3310-04-XX are easy to maintain.
Remove coarse dirt with a stiff bristle nylon bristle brush. Clean with a mild detergent solution and rinse well with clean water.
Allow to dry.
A proprietary fungicidal wash may be used where appropriate.
RETURNS OF PRODUCT
Please note that we stock the bases for this product and tint to the Joinery Colour Classics range in-house, so this product is non-returnable.