Osmo Opaque Gloss Wood Stain 2104
Professional, oil-based, high-gloss top coat for interior and exterior use.
Osmo Opaque Gloss Wood Stain is suitable for all interior and exterior timbers. Ideal as a low maintenance window pane and framework finish. Also well suited for finishing wooden fences, screens, pergolas, trellis, posts, garden pavillions, summerhouses and garden furniture.
- Weather and UV-resistant for long-term protection
- Microporous formula - does not crack, peel, flake or blister
- Biocide and preservative-free
|Coverage||20m² per litre|
|Application||Osmo Soft Tip Brush or Osmo Roller|
|Drying Time||Touch dry in 12 hours @ 23°C|
|Coats||2 coats recommended|
|Cleanup||Osmo Brush Cleaner and Thinner 8000|
|Storage||5 years if can kept dry and firmly shut. Store for 24–36 hours at room temperature before use|
Based on natural plant oils and waxes (sunflower oil, soya oil, thistle oil, carnauba wax and candelilla wax), paraffin, siccatives (drying agents) and water-repellent additives. Dearomatized white spirit (benzene-free).
|MPN||2104A, 2104B, 2104C, 2104D|
Surface must be clean and dry. Remove all traces of dust and dirt prior to application (maximum moisture content 20%).
Only apply on a frost-free surface. For best performance it is always recomended to remove all traces of previous finishes.
Existing oiled surfaces can be lightly rubbed back with meths then fully cleaned
Pre-existing varnishes and sealers must be completely removed via sanding or using a suitable paint stripper/varnish remover
For internal wood repairs, use Osmo Interior Wood Filler or Osmo Interior Gap Sealer
For exterior wood repairs, use Osmo Exterior Gap Sealer
To protect against blue stain in moist surroundings, pre-treat wood with Osmo WR Base Coat 4001
Use Osmo Soft Tip Brush or Roller. Apply thinly and evenly to the clean and dry wood along the wood grain and spread well.
Allow to dry for approx. 10-12 hours under good ventilation.
After drying, thinly apply a second coat.
For renovation works, one coat applied to the clean and dry surface is usually sufficient.
When used in dark indoor areas, the coating has a slight yellowing effect. This is due to its high oil content.