Bedec Extra Flex Masonry Paint 5L
- Stretches up to 400%, greatly resists cracking and flaking
- Get a smooth professional paint finish every time
- Long-lasting, surfaces will keep pristine for longer
- Fine crack bridging
- Microporous, lets the surface breathe
Areas of Use
Substrate Suitability: Masonry, Roughcast, Pebbledash, Brickwork, Cladding, Cement, Bricks and Mortar, Concrete Rendered Surfaces
Bedec Extra Flex Masonry Paint can be applied to previously painted surfaces after suitable preparation.
|Coverage||10m² per litre (depending on substrate and porosity)|
|Application||Brush, Roller, Spray|
|Drying Time||Touch dry in 2; dry to recoat in 4 hours @ 23°C|
|Cleanup||Clean directly after using water|
|Storage||2 years if can kept dry and firmly shut, away from direct sunlight|
|MPN||MB0002, MB0003, MB0415, MB0556, MB0773, MB1864, MB1910, MB1911, MBE004, MBH003, MBK004|
Treat mould and mildew with fungicidal wash. Remove all loose, flaky or powdery residues. Porous surfaces should be treated with stabilising solution, allowing at least 12 hours drying before coating. Common Fletton Bricks must be dry, and should be treated as porous.
Stir thoroughly and check colour before use.
Do not apply at temperatures below 10°C or when foggy or likely to rain before the paint has dried. Two coats are recommended for optimum durability. Ensure adequate ventilation during application and drying.
Clean equipment immediately after use with warm soapy water. Remove as much product as possible prior to cleaning.
Manufacturer's Part Numbers (MPN):
MB0002, MB0003, MB0415, MB0556, MB0773, MB1864, MB1910, MB1911, MBE004, MBH003, MBK004