Sikkens Cetol WF 960 Semi-matt Translucent Top Coat
Sikkens Cetol WF 960 is a 1K sprayable, semi-matt, translucent waterbourne acrylic pigmented midcoat and topcoat for exterior joinery constructions. After many years of continuing research, development and innovation Sikkens has reached a significant milestone. Through careful blending of the finest raw materials and specialist resins, have launched Cetol WF 960. As well as the usual premium performance characteristics that have been synonymous with previous Sikkens topcoat products like Cetol Duraflex WF 952, Cetol WF 960 offers users real and significant reductions in the ‘blushing/milky’ effect, so troublesome when freshly coated joinery is installed in wet conditions.
This coating is for exterior wooden components and can be tinted to any colour from the Joinery Color Classics collection with lightfast, weather resistant translucent pigments. It easy to apply and tested according to DIN EN 71 Part 3 "Safety of Toys".
It can be sprayed using a Airless or Airmix spraying system onto a variety of stable interior and exterior wooden components like Windows, Outer Doors, Conservatories and semi-stable wooden components like Rafters, Gates, Shutters and Posts.
PLEASE NOTE: THIS IS A BEPSOKE PRODUCT. ALL COLOURS HAVE TO BE TINITED BESPOKE COLOURS WILL HAVE A LONGER LEAD TIME.
Please note, next-day delivery and paid pre-12 delivery is not guaranteed for tinted colours. Orders may take up to 2-3 working days for delivery. The cut-off point for bespoke colours and colour matches is 11am. Please place your order by 11am. Please contact hello@allfinishes.co.uk to check the status of your order.
Features
- Good Bloom Resistance
- Superb Translucency
- Good Flow Out - No Orange Peel Effect
- Blocking Resistance - Allows early stacking
- Pigmented to the Sikkens Joinery Color Classics Range
Technical Information
Brand | Sikkens |
---|---|
Coverage | 6-12 m²/Litre Depending on application method, type and absorption of timber. |
Application | Airelss Spray, Airmix Spray |
Drying Time | Touch dry in 60 minutes, sandable in 4 hours, dry to handle in 4-6 hours @ 23°C |
Coats | 1-2 Coats as part of a system |
Cleanup | Clean with water immediately after use and, if required, add some commercially available washing-up liquid or ST 830. |
Storage | 2 Year if can kept dry and firmly shut |
VOC | 40g/l |
Ingredients | Acrylic |
MPN | 5188-044301-70, 5188-044301-68 |
Documentation
Product Information (353kb PDF)
Safety Data Sheet (93kb PDF)
Safety
Here at AllFinishes we take health and safety seriously and recommend you use the correct protection for the job. Disregarding safety equipment can be damaging and result in long term health conditions. Please check out our Moldex range for high quality respirators and hearing protection.
Preparation
The wood moisture content for the application of Sikkens coating systems should be between 12 % and 15 %. The selected wood, the design and the
applied layer thicknesses must comply with current technical standards. All horizontal surfaces shall be bevelled by 15 ° and all edges shall be rounded with a radius of at least 2 mm. Joints and open end grains must be sealed to prevent the ingress of water into the structure.
The substrates must be dry, free from dust and grease.
Application
Spray using an Airless or Airmix Spray System.
Wet film thickness: 2 x 150 µm or 1 x 150 up to max. 300 µm.
We recommend applying two layers of each colour shade.
Aftercare
We recommend using the Sikkens Cetol WM 675 in part of the manufacturers recommended system.
Impregnation
Cetol WV 880 BPD
Primer
Cetol WP 566
Mid coat
Cetol WM 675
Cetol WF 960
Top coat
Cetol WF 960
Product Numbers
Manufacturer's Part Numbers (MPN):
5188-044301-70, 5188-044301-68
Other
The coating system mentioned here is only an example; other systems are possible. Please refer to the relevant Technical Data Sheets and ask your Allfinishes Technical Representative for advice about coating systems.
All external materials coming into contact with the coating system (e.g. putty, adhesive tapes, sealants, cleaners, etc.) must be tested for compatibility by the user.