Renner Rio Verde Oil for Teak Furniture - VB3310
Renner Rio Verde VB3310 Oil for Teak Furniture
AllFinishes are proud to bring to you Renner Rio Verde, a range of wood coatings designed exclusively for the Do-it-yourself market through Renner’s superior expertise in waterborne paint technology.
The range has been created to adorn, bring Italian style and protect your furniture and wooden surfaces. VB3310 is a brushable Oil for Teak and exotic hardwood furniture made with a delicate blend of pure, high quality Tung oil and Linseed Oil which nourishes the timber with a honey, transparency. It will help to feed, shield and enhance the characteristics of hard, exotic and oil wood species. It is suitable for interior and exterior use and is ideal on garden furniture.
Rio Verde, Protection – Finishing – Maintenance.
Teak is virtually maintenance-free and does not need to be protected and if left in its untreated. It can be left outside all year round even in the most extreme weather conditions. If untreated, Teak furniture which is exposed to the sun’s harmful UV rays will bleach the timber to a silvery, grey patina. This is purely cosmetic and does not harm the strength or quality of the wood.
If want to preserve the natural honey colour of your teak furniture or to darken the colour of the wood, we recommend using this fantastic product which contains UV protection and anti-fungal properties which prevent the growth of mould and mildew on the surface.
VB3310 is an oil for teak furniture, made with natural tung and linseed oil, that will repel water, block greying and preserve the natural beauty of the timber. Give your wooden garden furniture a vibrant sheen finish by using Renner Rio Verde VB3310. It gives your wooden structures a new life and resists wear due to the elements. The perfect choice when giving garden furniture surfaces such as tables and chairs a fresh finish.
What applications/uses is Renner Rio Verde Oil VB3310 most suitable for?
VB3310 can be used on Garden Tables, Garden Chairs, Trellises, Deckchairs, Benches and other wood surfaces. Renner VB3310 is a durable product that is also suitable for the oiling of previously oiled and greying hardwood surfaces.
The finish creates a soft and velvety texture to the touch for a superior duel combination of style and comfort. As well as being low VOC, the product does not compromise on its durability. VB3310 can withstand daily usage of scratches, abrasion and general chemical agents.
- Made with Pure Tung and Linseed Oil
- Nourishes Hard, Exotic and Oily Woods
- Contains UV protection from sunlight
- For Interior and Exterior woodwork
- Perfect for Garden Furniture
|Brand||Renner Rio Verde|
|Coverage||20m² per litre|
|Drying Time||Touch dry, 16 hours at 15+°C|
|Coats||3 coats recommended|
|Storage||Store above 5°C|
Contains:Naphtha (petroleum), hydrodesulfurized heavy; Pine oil; Solvent naphtha (petroleum), light arom; Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclics, <2% aromatics. EU limit value for this product (cat. A/e): 400 g/l.
Product Information (679kb PDF)
We recommend using a respirator mask to protect you from dust particles. Please check out our Moldex range for high quality respirators and hearing protection.
Depending on the texture of the wood, sand the wood using the correct grit size.
On raw wood, prepare the substrate with 150 grit abrasive paper.
Remove any excess dust that may have been produced.
Mix the product well before usage to achieve the highest posible results.
The Rio Verde VB3310 application is flexible - can be applied using either a brush or a spray gun.
The average coverage is around 20m² per litre.
To retain the natural beauty in the wood, apply 3 coats. With drying time at least 16 hours, always paint in conditions above 10°C.
For dyed/impregnated wood, apply the product in a rag or brush. Do not leave heaps.To obtain a good degree of wood protection it is advisable to apply 2 coats at intervals of at least 16 hours.
For painted wood, it is possible to restore slightly worn surfaces by sanding with 320 grit abrasive paper and applying the product in a rag or brush. Do not leave heaps.
Before and after using VB3310 always ensure you store your product in a dry cool room above 5°C.
Manufacturer's Part Numbers (MPN):