Bona SuperSport ONE 5L
- A single-pack non-yellowing waterborne lacquer designed for use on wooden sports halls
- Uses oxygen crosslinking technology for enhanced durability and performance, increasing the longevity of the finish
- Full traffic after 12 hours
- Superb resistance to scuff marks, scratches and wear
- Ideal for newly sanded wooden sports floors that receive heavy foot traffic
- FIBA Certified and Classified EC1 for low indoor air emissions
A professional polyurethane varnish which is ideal for renovating indoor wooden sports floor halls.
Bona SuperSport ONE is a single-pack waterborne polyurethane finish for the surface treatment of wooden floors in school halls, sports halls, multi-purpose halls and other busy environments with wooden floors that require a high degree of protection. Particularly ideal for areas with high traffic.
For an even more durable varnish for pre-treated surfaces, please Bona SuperSport HD.
Features
- A single-pack non-yellowing waterborne lacquer designed for use on wooden sports halls
- Uses oxygen crosslinking technology for enhanced durability and performance, increasing the longevity of the finish
- Full traffic after 12 hours
- Superb resistance to scuff marks, scratches and wear
- Ideal for newly sanded wooden sports floors that receive heavy foot traffic
- FIBA Certified and Classified EC1 for low indoor air emissions
Technical Information
Coats | 2 |
---|---|
Coverage | Up to 9m² per litre |
Drying Time | 24 hours |
Documents
Bona SupertSport ONE Technical Data Sheet
Bona SuperSport ONE Safety Data Sheet
Bona SuperSport ONE 3-Part Spec
Bona SuperSport Finish Reference Sheet
Preparation
This product is for newly sanded wooden floors. Ensure the surface to be varnished is clean, dry and free of all dust, dirt and other surface contaminates.
Surfaces must firs be primed with Bona SuperSport Primer to ensure a smooth uniform finish and optimal adhesion.
Application
Always do a test area before starting any project to assess product suitability and that you are happy with the final finish. Shake well before use. Ensure room temperature does not fall below 13°C during application and drying.
- Apply Bona SuperSport One with a microfibre roller or swivel head applicator, using a smooth flowing action and avoiding accumulation of the lacquer
- Always maintain a wet edge to avoid overlaps
- Ensure finish is dry properly before applying further coats
- Please note, there will be a slightly longer drying time for each coat that is applied
- Ensure good ventilation during the drying process
- If the previous layer of lacquer has been allowed more than 24 hours drying time, then an intermediate sanding is always required using a screen or scrad system of P150 grit or finer
Where a longer drying time is required due to high temperature and/or low humidity, Bona Retarder can be added to the varnish to prolong the drying time.
Floors will tolerate light foot traffic approximately 24 hours after the final application, but please allow 72 hours drying before heavier use. The finished surface should be left for at least 5 days before covering with floor coverings or loading with heavy objects. Avoid damp mopping the floor during first week.
Aftercare
Regular Cleaning
For regular cleaning and to keep the surface in it's best condition, please use Bona SuperSport Cleaner.
Deep Cleaning
Maintenance