Sikkens Rubbol WF 387 is a sprayable opaque, Satin, mid and top coat for exterior joinery
Sikkens RUBBOL WF 387 is the perfect Satin, opaque top coat to suit any Sikkens system. The RUBBOL® product range gives wooden windows and doors a significantly greater durability and attractive look whilst ensuring surface protection against weather issues.
Sikkens Rubbol WF 387 Duraflex Technology is an opaque, Semi-gloss, sprayable waterborne acrylic mid and topcoat for exterior joinery constructions.
This coating is for exterior wooden components and is ready mixed to RAL 9016 Traffic White. It easy to apply and tested according to DIN EN 71 Part 3 "Safety of Toys".
It can be sprayed using a Airless or Airmix spraying system onto a variety of stable interior and exterior wooden components like Windows, Outer Doors, Conservatories and semi-stable wooden components like Rafters, Gates, Shutters and Posts.
- Permanent Elasticity - Duraflex Technology
- Good Weather Resistance
- Good Flow
- High Filling Properties
- Can be Tinted to any Colour desired
|Coverage||3-7 m²/Litre Depending on application method, type and absorption of timber.|
|Application||Airelss Spray, Airmix Spray|
|Drying Time||Touch dry in 60 minutes, sandable in 4 hours, dry to handle in 4-6 hours @ 23°C|
|Coats||1-2 Coats as part of a system|
|Cleanup||Clean with water immediately after use and, if required, add some commercially available washing-up liquid or ST 830.|
|Storage||2 Year if can kept dry and firmly shut|
Here at AllFinishes we take health and safety seriously and recommend you use the correct protection for the job. Disregarding safety equipment can be damaging and result in long term health conditions. Please check out our Moldex range for high quality respirators and hearing protection.
The wood moisture content for the application of Sikkens coating systems should be between 12 % and 15 %. The selected wood, the design and the
applied layer thicknesses must comply with current technical standards. All horizontal surfaces shall be bevelled by 15 ° and all edges shall be rounded with a radius of at least 2 mm.
Joints and open end grains must be sealed to prevent the ingress of water into the structure. The substrates must be dry, free from dust and grease.
Spray using an Airless or Airmix Spray System.
Wet film thickness: 2 x 150 µm or 1 x 150 up to max. 300 µm.
We recommend using the Sikkens Rubbol WF 387 in part of the manufacturers recommended system.
Cetol WV 880 BPD
Rubbol WP 194
Cetol WM 675
Rubbol WF 387
Rubbol WF 387
Manufacturer's Part Numbers (MPN):
The coating system mentioned here is only an example; other systems are possible. Please refer to the relevant Technical Data Sheets and ask your Allfinishes Technical Representative for advice about coating systems.
All external materials coming into contact with the coating system (e.g. putty, adhesive tapes, sealants, cleaners, etc.) must be tested for compatibility by the user.