Sikkens RUBBOL WF 3310-04-35 Brush Semi-Matt Opaque Topcoat
Sikkens RUBBOL® WF 310 Brushable Semi-matt
Sikkens Wood Coatings are the industrial division of Akzo Nobel and are renowned for their expertise in joinery coatings. The wood is protected in the natural environment of your garden with Sikkens RUBBOL® WF 310. The emphasis on quality ensures Sikkens RUBBOL® WF 310 provides a durable, stylish, colourful look to help rejuvenate or renovate any outdoor woodwork.
Sikkens RUBBOL WF 310® is a water based pure acrylic, Semi-Matt, opaque Mid and Topcoat paint. It creates a very tough and hard wearing finish that combines the advantages of the technology and stunning colour in one product.
Sikkens RUBBOL WF 310® leaves a smooth surface and is resistant to UV light, dirt and moisture. This is the ideal product to protect and add value to your exposed wooden surfaces.
It's ideal for protecting all stable (Windows, Outer Doors, Conservatories, Sheds, Summerhouses) hard and soft wood surfaces. It can also be used for the maintenance of wooden components previously treated in Sikkens RUBBOL® WF 382 or Sikkens RUBBOL® WF 380. If the wooden components are accidentally damaged in transit or installation, you can remedy small damages with Sikkens RUBBOL® WF 310. It has been matched and specified for lustre and colour shade to the afformentioned spray products and can be applied by cleaning the damaged old coating layer and sanding gently, then brushing the coating once or twice in the desired colour shade.
- Suitable for softwood and hardwood
- Available in the Sikkens 4041 Color Concept, RAL Classic, NCS or any desired colour shades
- Ready to use on external and internal wood
- Protects wood surfaces drying within 4 hours
- Apply by brush or roller
|Brand||Sikkens Wood Coatings|
|Coverage||10m2 per litre|
|Application||Brush, Dip, Spray|
|Drying Time||Touch dry in 30 minutes, dry to handle in 4–6 hours @ 23°C|
|Coats||2 coats recommended|
|Cleanup||Clean directly after use with water or washing up liquid or with Sikkens ST 830|
|Storage||2 Years if can kept dry and firmly shut|
Product Information (348KB)
Safety Data Sheet (176KB)
Here at AllFinishes we take health and safety seriously and recommend you use the correct protection for the job. Disregarding safety equipment can be damaging and result in long term health conditions. Please check out our Moldex range for high quality respirators and hearing protection.
Perfect sanding is a must for a clean and attractive surface finish.
The wood moisture content for the application of Sikkens coating systems should be between 12–15%.
Imperfect, loose coating must be completely removed. Intact coating should be completely sanded. Raw wood must be impregnated where necessary using Sikkens CETOL® WV 885 BPD.
Always consult the technical data sheet before use. Before use, read the technical data and product information. Even when working with low emission products one should take care of the customary protection measures.
Applying the product too generously and with insufficient ventilation will lead to delays in drying.
Primer coat of Sikkens RUBBOL® WP 105.
Use Sikkens Kodrin spachtel if necessary if filling is required.
Mid coat of Sikkens RUBBOL® WF 310
Top coat of Sikkens RUBBOL® WF 310
The choice and use of the coating system, especially the colour shade, should also be taken into account. Darker shades can increase the surface temperature (up to 80°C)
Allow to dry for approximately 4–6 hours with good ventilation in between coats. Lower temperatures and/or higher air humidity can increase the drying time.
After 2–3 weeks, the surface is completely and thoroughly hardened.
Wood surfaces treated with Sikkens RUBBOL® WF 310 are easy to maintain.
Remove coarse dirt with a stiff bristle nylon bristle brush. Clean with a mild detergent solution and rinse well with clean water. Allow to dry. A proprietary fungicidal wash may be used where appropriate.