Please ensure you are selecting all options when adding to your basket
Price Range:£4.75 - £342.00
Price £4.75
In stock
Rubio Monocoat Oil Plus 2C Ash Grey


An alluring mix of sky grey and graphite will give your wooden surfaces a gracefully aged finish. The only one-coat protective coloured wood oil for your interior wooden surfaces and completely VOC free. Ideal for almost all wood types.

Get the look

Rubio Monocoat Oil Plus 2C - Ash Grey

    Price Range:£4.75 - £342.00
    In stock
    Next day delivery available

    Rio Verde Vintage Prestige Truffle 500ml

    Price £14.50
    In stock
    Next day delivery available

    rubio colours

    Rubio Monocoat Oil Plus 2C Ash Grey


    rmc tech info


    Tech Data Sheet

    Product Catalogue


    Do I need Part A and B?

    Part A only is recommended for low-traffic areas, such as wooden surfaces, kitchen tops & chopping boards. For high-traffic or scuff-prone areas, you will need Part B. This is an accelerator, which is especially beneficial for wooden floors, bathrooms & tabletops. Part B ensures a quick dry, cure & superior protection. The surface will be fully cured 7 days after application. Please use Part B if you require added heat resistance (e.g. for use in restaurants.)

    Using Part A alone will extend the curing period to 21 days, increasing the chance of scuffing.


    Perfect sanding is a must for a clean and attractive surface finish. Please see the technical data sheet for the recommended sanding sequences for the surface you are treating. Vacuum clean thoroughly, remove any remaining dust with Rubio Monocoat Cleaner.

    A trial application of Rubio Monocoat Oil Plus 2C is recommended on a small section of the substrate before commencing.

    How do I apply Rubio Monocoat Oil Plus 2C?

    Oils enhance the natural tone of wood. Applying the product too generously and with insufficient ventilation will lead to delays in drying.

    If using both components, carefully mix the two components (1 to 2 min) with a ratio of approximately 3:1 of Part A to Part B.

    Once the cleaned surface is dry, spread out a small quantity of Rubio Monocoat Oil Plus 2C with a cloth or scrub pad - we recommend Rubio Monocoat's specially designed Scrubby Set, which helps the oil penetrate the wood fibres for long-lasting and even coverage. Work in zones of 5–10 m2.

    Let the oil absorb for a few minutes. Thoroughly remove all excess of oil with a clean cloth within 15 minutes per zone. The surface should feel dry! Finish all zones the same way.

    After 24–36 hours the surface can be used.


    Wooden surfaces treated with Rubio Monocoat Oil Plus 2C are very easy to maintain.

    Remove coarse dirt with a broom or a vacuum cleaner. To clean, add Rubio Monocoat Natural Soap to water and clean the surface with a damp mop or cloth.

    To refresh and clean intensively, we highly recommend:

    For general maintenance or to refresh the look of the original oil, we highly recommend:

    Write Your Own Review
    You're reviewing:Rubio Monocoat Oil Plus 2C - Ash Grey
    Your Rating