FESTIVE SHUTDOWN: Last orders 20th Dec - Reopening 2nd Jan. Click here to read more
Please ensure you are selecting all options when adding to your basket
Price Range:£4.75 - £285.00
Price £4.75
In stock
SKU
Rubio Monocoat Oil Plus 2C - Antique Bronze

ONE COAT INTERIOR WOOD OIL IN ANTIQUE BRONZE. BEAUTIFUL, NATURAL COLOUR & PROTECTION.

Blended with distressed bronze hues for a classic vintage finish. Combine with Vintage Brown Precolor for a deeper, intensive effect. Oil Plus 2C is the only single coat application oil on the market. The rich & warm effect ensures all of your interior wooden surfaces look effortlessly luxurious & elegant.

Frequently bought together

  1. Rubio Monocoat Oil Plus 2C - Antique Bronze
  2. +
  3. Rubio Monocoat Cleaner
  4. +
  5. Rubio Monocoat Precolor Easy
  6. +
  7. Rubio Monocoat Scrubby Set
Total price: £0.00
  • This item: Rubio Monocoat Oil Plus 2C - Antique Bronze £4.75

rubio colours


Wooden floor treated with Rubio Monocoat Oil Plus 2C Antique Bronze


TECHNICAL INFORMATION

rmc tech info


FAQ

Do I need Part A and B?

Part A only is recommended for low-traffic areas, such as wooden surfaces, kitchen tops & chopping boards. For high-traffic or scuff-prone areas, you will need Part B. This is an accelerator, which is especially beneficial for wooden floors, bathrooms & tabletops. Part B ensures a quick dry, cure & superior protection. The surface will be fully cured 7 days after application. Please use Part B if you require added heat resistance (e.g. for use in restaurants.)

Using Part A alone will extend the curing period to 21 days, increasing the chance of scuffing.


Documents

Tech Data Sheet

Product Catalogue


Preparation

Perfect sanding is a must for a clean and attractive surface finish. Please see the technical data sheet for the recommended sanding sequences for the surface you are treating. Vacuum clean thoroughly, remove any remaining dust with Rubio Monocoat Cleaner.

A trial application of Rubio Monocoat Oil Plus 2C Antique Bronze is recommended on a small section of the substrate before commencing.


How do I apply Rubio Monocoat Oil Plus 2C Antique Bronze?

Oils enhance the natural tone of wood. Applying the product too generously and with insufficient ventilation will lead to delays in drying.

If using both components, carefully mix the two components (1 to 2 min) with a ratio of approximately 3:1 of Part A to Part B.

Once the cleaned surface is dry, spread out a small quantity of Rubio Monocoat Oil Plus 2C with a cloth or scrub pad - we recommend Rubio Monocoat's specially designed Scrubby Set, which helps the oil penetrate the wood fibres for long-lasting and even coverage. Work in zones of 5–10 m2.

Let the oil absorb for a few minutes. Thoroughly remove all excess of oil with a clean cloth within 15 minutes per zone. The surface should feel dry! Finish all zones the same way.

After 24–36 hours the surface can be used.


Aftercare

Wooden surfaces treated with Rubio Monocoat Oil Plus 2C Antique Bronze are very easy to maintain.

Remove coarse dirt with a broom or a vacuum cleaner. To clean, add Rubio Monocoat Natural Soap to water and clean the surface with a damp mop or cloth.

To refresh and clean intensively, we highly recommend:

For general maintenance or to refresh the look of the original oil, we highly recommend:

Write Your Own Review
You're reviewing:Rubio Monocoat Oil Plus 2C - Antique Bronze
Your Rating