Rubio Monocoat Maintenance Oil
Protect and refresh the colour of your oiled wooden surfaces!
Rubio Monocoat Soap will nourish your wood, give it a fuller look (satin sheen) and increase the fluid resistance!
Rubio Monocoat Maintenance Oil allows you to upgrade your surfaces treated with other oils, or use to refresh your wood that has been previously treated with Rubio Monocoat Oil Plus 2C. The maintenance frequency depends on the intensity of the floor traffic. It is advisable to apply this treatment just before the colour fades.
The oil adds a satin luster to the surface and can be applied to surfaces coated in Monocoat oils after 36 hours of the oil application or any time thereafter.
Features
- For protecting and refreshing RMC Oiled Wooden Surfaces
- Available in different colours to suit
- No Professional Expertise needed
Technical Information
Coverage: 75–100m2 per litre
Application: Pad
Drying Time: Touch dry in 6–8 hours @ 23°C. F
Storage: 1 Year if can kept dry and firmly shut
VOC: 0g/l
Preparation
Eliminate dirt and dust from the surface or floor.
Clean the surface or floor thoroughly with Rubio Monocoat Soap and water. Rinse well with water to eliminate any soap residue. Leave it to dry completely.
Application
Manual application — Apply the oil using a cloth, brush, or sponge.
Mechanical application — Apply the oil using a floor polisher and a beige colored pad. Treat areas of preferably 2 to 4 m2. Each treated area should be wiped dry using kitchen tissue or a cotton cloth within 15 minutes. When using a floor polisher, wipe dry using a white pad.
COVERAGE: 0,5 l = 75–100 m2 (depending on wear)
Use very little product to prevent the floor from becoming sticky. These usages are merely indicative. Results depend on wood type and method of preparation. It is always recommended to make a sample in order to calculate the exact usage.
Aftercare
Ensure the room is well-ventilated. The surface should be dry after 6–8 hours.