Experience Rubio Monocoat's Revolutionary VOC-free Wood oil
Discover the revolutionary Rubio Monocoat Oil Plus 2C in an experience kit that gives you everything you need to determine if Rubio Monocoat is the right product for you. This kit contains two unfinished blocks of wood, two Rubio Monocoat Scrubby Pads, a Rubio Monocoat White Cotton Cloth, and two sample-size bottles of Rubio Monocoat Oil Plus 2C in Charcoal and Pure.
Rubio Monocoat is a premium timber oil that gives you great coverage on your project while saving on costs, as it only requires a single coating and has a large spread rate. Often people embark on large projects where this makes a big difference and they can rest assured that they bought a premium product for a reason.
Rubio Monocoat's innovative and ground-breaking molecular bonding technology provides a very high average spread rate of 50 m²/L, which makes it a highly affordable product. The single layer application of Monocoat also benefit users with reduced labour time and costs.
Due to its unique formulation, Rubio Monocoat Oil Plus 2C is the only single coat application oil on the market. The natural ingredients on which the oils are based generate a molecular reaction with the exposed cellulose fibres of the wood. This ensures a consistent finish which is easy to apply in one application.
Rubio Monocoat Oil Plus 2C is available in clear (Pure) and 40 transluscent colours.
It can be used on its own as a Single Pack (Part A) for wooden surfaces like furniture, kitchen tops and chopping boards. For more high-traffic or scuff-prone areas like wooden floors, bathrooms and table tops, an Accelerator (Part B) can be added to ensure a quick dry, quick cure and superior protection. By using the Part B, the surface will be fully cured within 7 days of application. Using Part A alone will extend the curing period to 21 days, increasing the chance of scuffing.
Rubio Monocoat Oil Plus leaves a smooth surface and is resistant to dirt, water and abrasion. In comparison to conventional finishes, the use of plant ingredients creates a more evenly coloured and more harmonious appearance.
Rubio Monocoat Oil Plus is ideal for protecting all Wooden Floors (Solid Wood, Plank Wood, Blockstrip, Oriented Strand Board and Cork floors) and wooden furniture.
- Experience Kit contains everything you need to try out Rubio Monocoat Oil
- Contains 2 unfinished wooden blocks, two scrubby pads, a white cotton cloth, and two sample-size bottles of oil in Pure and Charcoal
- Monocoat contains 0% Volatile Organic Compounds (VOC), nor does it contain other harmful chemicals
- Monocoat is economical. 1 Litre of oil is enough to finish 30–50 square metres of wood
- The one coat system offers time savings of up to 42% compared to multi-coat wood finished
- Enhances the natural look of wood at the same time as protecting the surface
- Monocoat is versatile. The oils can be applied to any type of wood and can be used on floors, bathrooms, countertops, furniture, doors and stairs
|Coverage||30–50m2 per litre|
|Application||Brush, Roller, Pad|
|Drying Time||Touch dry in 15 minutes @ 23°C. Fully cured in 12–36 hours|
|Cleanup||White spirit or brush cleaner|
|Storage||1 Year if can kept dry and firmly shut|
|Ingredients||Based on Linseed oils and waxes|
Perfect sanding is a must for a clean and attractive surface finish. Please see the technical data sheet for the recommended sanding sequences for the surface you are treating. Vacuum clean thoroughly, remove any remaining dust with Rubio Monocoat Cleaner.
A trial application of Rubio Monocoat Oil Plus is recommended on a small section of the substrate before commencing.
Oils enhance the natural tone of wood. Applying the product too generously and with insufficient ventilation will lead to delays in drying.
If using both components, carefully mix the two components (1 to 2 min) with a ratio of approximately 3:1 of Part A to Part B.
Once the cleaned surface is dry, spread out a small quantity of RMC Oil Plus 2C (cloth or scrubbing machine with thin beige pad). Work in zones of 5–10 m2.
Let the oil absorb for a few minutes. Thoroughly remove all excess of oil (cloth or scrubbing machine with white pad) within 15 minutes per zone. The surface should feel dry! Finish all zones the same way.
After 24–36 hours the surface can be used.
Wood surfaces treated with Rubio Monocoat Oil Plus 2C are easy to maintain.
Remove coarse dirt with a broom or a vacuum cleaner. To clean, add Rubio Monocoat Natural Soap to mop water and clean the surface with a damp mop. To refresh and clean intensively, use Rubio Monocoat Grease Remover, Rubio Monocoat Lime Spot Remover or Rubio Monocoat Tannin Remover when necessary.
For a general maintenance oil to refresh the look of the original oil please use Rubio Monocoat Universal Maintenance Oil.