Renner YO-**M760 is a single-pack water-based topcoat for interior use.
Available in a range of colours and Sheens, Renner YO-**M760 is an excellent environmentally friendly choice of coating that offers excellent hardness and good chemical resistance. Formulated with non-yellowing polyurethane and Acrylic resins, it maintains its colour. It's suitable over pigmented water-based primers like YL-M604, and can be crosslinked with 5% of YL-M419 for Glass adhesion, extra durability and chemical resistance if needed.
Areas of Use
Perfect for flat parts, turned parts, picture frames, furniture and skirting boards
- Fast drying
- Even matting and smoothness
- Good opacity and hiding power
- Surface hardness
- Chemical resistant
|Application||Conventional Spray, Airmix Spray, Airless Spray, Electrostatic Spray|
|Coverage (G/M²))||80 - 120 per coat|
|Coats||1 - 2 Max.|
|Touch Dry||15 minutes|
|Sand Dry||25 minutes|
|Thinner||5% water if necessary|
|Solids Content %||40 ± 2|
|Specific Gravity (KG/L)||1.15|
|Viscocity||45 ± 3 (DIN 6 @ 23°C)|
Apply one or two basecoats of water-based pigmented primer from the Renner range. Once properly dried it should be sanded to create a smooths urface to paint the topcoat onto. We suggest using 280-400 Grit abrasives. For best results, use stearate abrasives. They provide higher efficiency than normal abrasives and reduce clogging.
Wth good drying conditions and with good circulation (20°C with 65% humidity), build can be achieved with just 1 coat of 120-140 G/M². Under these circumstances it can be dust-free after 30 minutes. Lower temperatures and higher relative humidity can lead to a longer drying time. It is possible to speed up drying using heated ovens. It can be cross-linked 5% of YC-M419 for extra durability or glass adhesion.
Due to the high chemical resistance of water-based topcoats, the packaging used does not usually cause problems. We recommend high-density polythene. PVC or pluriball are not recommended.
Renner YO-**M760 can be used as a ready for use product. Improved chemical resistance can be achieved by crosslinking 5% with YC-M419. It is particularly recommended for flat parts subject to hard wear or contact with chemicals. Please contact us for further advice.