Rio Verde Satin Enamel Paint
Rio Verde Satin Enamel Paint is a high quality opaque pigmented finish with superb coverage.
Rio Verde Satin Enamel Paint is an exterior satin paint designed for renovating and transforming wood and metal, leaving a silky smooth finish with ease. The paint is ideal for use in modern and contemporary exterior design schemes.
Area Of Use
Windows, Garden Furniture, Coverings, Balconies, Fences, Beading, Beams
Metal Surfaces: Gates, Structures, Sculptuers, Galvanised Sheets, General Iron
If the surface has worn, please prime with Rio Verde Anti-Rust Primer.
It does not change in colour when exposed to general UV radiation and resistant to day to day weathers and atmospheric agents. Formulated at elevated brushings, distension and coverage, the RLxx40 range can be applied on treated wood which has already been sanded, and raw wood, but that must be sanded with a 150 grit paper. With varnished wood, 220 grit.
On rough wood it is suggested to apply 2 coats, with the wood being sanded at 150 grit paper and impregnated with shades close to the final colour for the best results.
On dyed/impregnated wood, it is possible to apply RLxx40 on treated wood with primers or impregnating agents with a low solid residue. Once the surface is clean, it can be lightly sanded with abrasive paper or scotch.
To use RLxx40 on wood that has already have a painted finish applied, its advised to use sand paper with grits of 220-240. After sanding, clean the surface from any excess dust that may be still in contact with the wood.
- Water based with a low odour.
- Smooth, Matt finish, soft to the touch.
- Superb coverage.
- Great UV protection and weather resistance
- Works over old paint, varnish and iron.
|Brand||Renner Rio Verde|
|Coverage||10m² per litre|
|Drying Time||Between the coat; Final drying time: 12 hours|
|Coats||2 coats recommended|
|Storage||Store above 5°C|
Mixture of: 5-chloro-2-methyl-2h-isothiazol-3-one and 2-methyl-2h-isothiazol-3-one (3:1); 2-methyl-4-isothiazolin-3-one; 1,2-Benzisothiazol-3(2H)-one. May produce an allergic reaction.
If medical advice is needed, have product container or label at hand. Keep out of reach of children. Avoid release to the environment. Dispose of contents / container in accordance with regulation in force.
|MPN||RL1040, RL1140, RL1240, RL1340, RL1440, RL1540, RL1640, RL1740, RL1840, RL2040|
Product Information (675kb PDF)
Clean the area thoroughly, ensuring it is free from any dust or grease that might be lingering on the surface.
In case of any present areas of old paint, we recommend sanding the area down with a 150-180 abrasive paper.
For sanding works we recommend using a respirator mask to protect you from dust particles. Please check out our Moldex range for high quality respirators and hearing protection.
Remove any excess dust that may have been produced.
Mix the product well before usage to achieve the highest possible results.
To apply Rio Verde Satin Enamel Paint onto rusted metal and iron surfaces, remove mechanical rust with paper or abrasive brushes. We strongly recommend applying a metal primer, such as the Rio Verde Anti-Rust Metal Primer or Bedec All Metals Primer.
Rio Verde Satin Enamel Paint can be applied using either a brush or spray.
The average coverage is around 10m² per litre, depending on various factors such as substrte porosity.
To maintain the natural beauty in the wood, we recommend application of 2 coats. With drying time at least 2-6 hours between coats, always paint in conditions above 10°C. Finalised dry is after 12 hours.
Before and after using RLxx40 always ensure product is stored in a dry cool room above 5°C.
Manufacturer's Part Numbers (MPN):
RL1040, RL1140, RL1240, RL1340, RL1440, RL1540, RL1640, RL1740, RL1840, RL2040