Osmo Wood Reviver Power Gel 6609

Osmo Wood Reviver Power Gel revives and restores exterior wooden surfaces prior to treatment.

Osmo Wood Reviver Power Gel restores exterior greyed wood back to its original colour and character. There are noticeable results in just 30 minutes.

Please only use this product on bare wood or wood that has not yet been treated with oil, or wood that has not been oiled for a long period of time.

How To Use

Areas of Use

Most exterior woodwork and wooden surfaces, including: windows, frames, doors, trellises, garden furniture, timber cladding, sheds, decking and summer houses

Features

• Ideal product for reviving exterior softwood and hardwood
• Feeds and restores the original characteristics in the wood
• Revives wood that has turned grey due to the exposure of sun and general weathers.
• Penetrates deeply into the wood
• Easy to apply.
• Odour-free and biodegradable

Key Information

Documents

Product Information

Safety Data Sheet

Preparation

Before application, ensure that surfaces have been cleaned from any possible contaminates. It is best to remove dirt, grease, mould, algae or moss from the surface with a scraper, hard bristle brush or a stiff broom.

Dampen the wood with clean water before you apply Osmo Wood Reviver Gel.

Please ensure that you always wear gloves and protective clothing. Wear protective eyewear when using this product.

Application

We always recommend carrying out a test patch on the wood to check compatibility.

Please follow the manufacture’s guidelines and instructions on the container at all times during the application process to ensure optimum results.

Apply a generous amount of gel along the wood grain using a stiff brush, we strongly recommend using Osmo Decking Cleaning Brush. The Osmo Decking Cleaning Brush is manufactured with firm bristles that are ideal for multi-purpose cleaning and can be used for various different cleaning jobs around the garden and exterior areas.

After approximately 20 minutes, scrub the area of application with the brush or an abrasive pad.

Rinse off the Power Gel with plenty of clean water.

Allow the area 24 to 48 hours for the colour of the timber to return to its original state.

Depending on the extreme exposure, you may need to repeat this process for a second application.