enhance your exterior wood's natural structure.
Protects, maintains and improves the appearance of garden furniture made of Teak and other exotic hardwoods in covered outdoor areas. Also well suited for the clear treatment of garden furniture and other similarly used surfaces.
Exotic hardwoods, such as:
- Pressure impregnated wood like Pine
- Applied easily to difficult to reach areas on furniture
- Microporous finish - does not crack, peel or flake
- Water and dirt-repellent
- Outstanding coverage
- Durable and easy to maintain
- Easy to use
- Safe for animals, plants and humans once dry
|Coverage||25m² per litre|
|Application||Osmo's specially designed Decking Brush|
|Drying Time||Touch dry in 10–12 hours @ 23°C|
2 coats recommended.
One coat usually sufficient for renovation works.
|Cleanup||With Osmo Brush Cleaner|
|Storage||Up to 2 years and longer if can is kept dry and closed tightly|
|Ingredients||Based on natural plant oils (sunflower oil, soya oil, thistle oil and linseed oil), siccatives (drying agents) and additives, biocidal active ingredient: Propiconazole. Dearomatized white spirit (benzene-free).|
Wood surface must be clean, dry and frost-free (moisture content max. 20%).
Spray is ready to use. Shake spray can well and carry out trial spray.
Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed.
Wear a dust mask during sanding works (as a general rule).
Hardwoods with an especially high content of natural wood extractives need to weather off (for approx. 4 weeks) or be degreased with Osmo Brush Cleaner and Thinner.
The condition of the wood and other factors can influence the finished surface. We highly recommend a trial application, especially for unfamiliar surfaces.
Spraying distance approx. 25cm. Rub in with a brush afterwards.
While applying, cover and protect surrounding areas and parts that should not be treated against the spray mist. Wipe away any excess with a cloth.
Allow to dry for approx. 12 hours under good ventilation and apply a second coat.
When renovating, one coat applied is usually sufficient.
Clean spray nozzle after use.
Approx. 12 hours (normal climatic conditions, 23°C/ 50 % rel. humidity). Lower temperatures and/or higher air humidity can increase the drying time.
Ensure area is well ventilated whilst drying.