Liberon stone floor wax, designed to protect your floor with non-slip qualities with colour enhancing technology.
Gives a traditional satin finish and helps to protect against stains and scratches. Provides a slip resistant finish.
Liberon Stone Floor Wax is the ideal product for protecting stone, slate, terracotta, quarry tile and other natural and man-made stone floor product after sealing with Liberon Colour Enhancer Stone Floor Sealer.
The Product holds non-slip resistant qualities which enhances the natural colours in the stone whilst producing beautiful soft lustre to the surface.
Stone Floor Wax is a product which helps to prevent general staining and is highly resistance to scratching and scuffing.
- Nourishes, protects and enhances the colour in one solution.
- Provides a satin, slip resistant finish.
- Protects against stains and general scratches.
- Formulation made from Carnauba wax base.
- For use on stone, terracotta, quarry tiles and other natural stone floors.
- Can be used on man-made stone floors.
|Coverage||1 L = 10-12 m²|
|Application||Brush - cloth|
|Drying Time||2 Hours|
Please check the Safey Data sheet for ingredients.
Before you go ahead and apply this product, its advised that you test the product out on a spare section of the floor to analyse the end results.
Ensure that the surface is clean and dry.
Any previous finishes that may be on the surfaces should be removed to allow the Liberon Stone Floor Wax to work.
Porous surfaces should be sealed first with Liberon Colour Enhancer Stone Floor Sealer.
Apply a thin layer of Stone Floor Wax to the floor using a clean cotton lint-free cloth or any suitable application brush.
It’s important that you apply the wax evenly across the surface.
Allow the surface to dry for around 1-2 hours then buff to a satin sheen using a brush, cotton cloth or buffing machine.
When it comes to cleaning the floor, sweep or vacuum the floor. It’s suggested that you do not wash the surface with water.
Buff the surface area to maintain shine.
It’s important that you wipe up spillages immediately. If you have repeated exposure to moisture in one selective area, the wax floor may damage and stain the stone.
For stubborn marks, we recommend using Liberon Wax & Polish Remover and re-apply Stone Floor Wax.
Re-wax the floor if you see some areas become to look dry and dull. Floors in high traffic areas will need extra attention, waxing may become more regular.
Manufacturer's Part Numbers (MPN):