Liberon Spirit Sanding Sealer

Please ensure you are selecting all options when adding to your basket
Price Range:£7.95 - £58.99
Price £12.99
Liberon Spirit Sanding Sealer

Liberon Spirit Sanding Sealer

AllFinishes presents to you Liberon - a traditional, superior range of wood and surface finishes that have been preserving and protecting British floors since 1912. With high advanced technology, Liberon is unbeatable in quality and are optimised for durability, quick drying with the perfect finish.

Liberon Sanding Sealer is a quick-action solution which prepares the surface of bare wood and MDF before applying a wax finish or decorative product. Sanding Sealer will seal the surface so that the wax can sit on the surface without being completely absorbed. Sealer will allow you to use less wax than required and special lubricants will make sanding easier.

This product is not suitable for using paints, varnishes or wood oils. To use Liberon Sanding Sealer for shelves, work tops and other surfaces that need a hard durable finish, you can seal using Liberon Finishing Oil as an alternative to using Liberon Sanding Sealer.

On floors we recommend using Liberon Floor Sealer and then apply Liberon Floor Wax.


  • Available to use on all types of new and stripped wood, including MDF.
  • Spirit-based sanding sealer for interior wood usage.
  • Can be applied using a brush or spray.
  • Ideal for sealing wood before the application of wax.
  • Prevents the action of dirt and other grease in contact with timber.
  • Can be used for turned woodwork.

Technical Information

Brand Liberon
Coverage 3-5m² per 500ml
Application Brush
Drying Time 10-30 minutes 
Coats 1 coat
Storage Always store in dry conditions with the lid firmly shut. Keep out the way of children.
VOC High

Please check the Safey Data for ingredients.

MPN 014012, 014013, 014014, 014015, 014016


Product Information

Safety Data Sheet


Ensure surfaces are stripped bare, dry and dust free.

If you want to colour the wood first, we can suggest using Liberon Palette Wood Dye before the sealer is applied.

Ensure that the area you are applying this product in is well ventilated.


Shake the contents of the product well before using.

You can apply this product using a brush, or a thin coat of sealer.

Allow to dry for at least one hours before sanding thoroughly using a 240 or 320 grit abrasive paper.

If required, apply a second coat and repeat the sanding process after around one hours.

You can also apply Liberon Wax Polish Black Bison and use a Steel Wool Ultra Fine Grade 0000.

It’s important to do a test patch first before using the product on a large scale area to analyse the potential results this product may have on your wood.


Keep product below 22°C.

Keep out the reach of children.

Keep away from any sources of ignition, no smoking around the product.

Do not empty out into drains.

Product Numbers

Manufacturer's Part Numbers (MPN):
014012, 014013, 014014, 014015, 014016


5022640000160, 5022640000177, 5022640000184, 5022640002652, 5022640002669

Write Your Own Review
You're reviewing:Liberon Spirit Sanding Sealer