Liberon Natural Finish Interior Varnish - 1L
Liberon Natural Finish Interior Varnish. Highly resistant to scratches and stains. Non-yellowing water-based formula.
AllFinishes presents to you Liberon. A traditional superior range of wood and surface finishes that have been preserving and protecting British floors since 1912. With high advanced technology, Liberon is unbeatable in quality and are optimised for durability, quick drying with the perfect finish.
Liberon Natural Finish Interior Varnish is a hard durable and has long lasting qualities which is the ideal product to be used on soft and hardwood furniture on most interior woodwork. You will not be able to use this product on over an oil-based finish, also may raise the grain on some hardwoods.
You can use Natural Finish Interior Varnish on work surfaces, panelling, doors, and skirting boards. This product holds non-yellowing qualities and has fast drying properties.
- High quality resistance against scratches and stains.
- Water-based product with low VOC.
- Quick Drying and easy to use.
- Non-yellow properties.
- Maintains and holds the natural beauty and feel of the wood.
- Endorsed by the Guild of Master craftsmen.
- Can be used on both soft and hardwoods.
|Coverage||10-12m² per litre|
|Application||Brush or roller|
|Drying Time||Minimum 2 hours|
|Coats||3 coats recommended|
|Storage||Always store in dry conditions with the lid firmly shut. Keep out the way of children.|
Please check the Safey Data sheet for ingredients.
Always test the product out first on a small surface area to analyse and see if that is something you want to achieve.
Before you apply Natural Finish Interior Varnish, ensure you sand the wood and remove any existing finishes that may have been previously used on the surface.
Ensure that the surface is clean from any dirt and grease.
Use Liberon Natural Finish Interior Varnish in well ventilated areas to ensure your safety.
If you are wanting to apply a colour to the timber before applying the product, you can use Liberon Palette Wood Dye which comes in various amount of colours to choose from. If you do choose to dye the wood first before using Natural Finish Interior Varnish, ensure you leave the Palette Wood Dye to dry for a minimum of 8 hours. Ensure to be careful when you apply the first coat of Natural Finish Interior Varnish, in some cases harsh brush strokes may cause the Palette Wood Dye to lift and lose the colour. Do not exceed the 10% dilution process of the Natural Finish Interior Varnish with Liberon Palette Wood Dye.
Any imperfections in the wood? Then you can use Liberon Wood Filler to fill in cracks and gaps you may have.
Ensure you shake the contents of the product well before the application process.
Apply a healthy amount of varnish on the surface in an evenly manor using a paint brush, or a short hair roller, depending on the scale and preference of the project. Apply your strokes in a criss-cross format applying the final coat in the direction of the grain.
Allow the varnish to dry for a minimum of 2 hours before applying further coats.
It’s recommend that you apply 3 coats in total, sand lightly between each coats if required to do so.
More coats may be required for wooden items which heavily used.
For the final coat of varnish, you will have to wait for a total of 24 hours drying time before going back to regular usage.
Any spillage on the wooden areas you have treated with varnish will need to be cleaned and removed immediately.
For general cleaning maintenance, wipe over the area with a damp cloth, using a very mild detergent if required to do so.
If the surface shows clear indications of general wear and tear, then its recommended that you re-apply coats of varnish.
Keep out the reach of children.
Do not empty this product in drainage systems.
Do not allow this product to freeze.
Manufacturer's Part Numbers (MPN):