Liberon Floor Sealer
Liberon Floor Sealer, High Quality Barrier Formulation.
AllFinishes presents to you Liberon. A traditional superior range of wood and surface finishes that have been preserving and protecting British floors since 1912. With high advanced technology, Liberon is unbeatable in quality and are optimised for durability, quick drying with the perfect finish.
Oil-based finish for wood, parquet and other types of wooden flooring.Floor Sealer can be used separately as a general finish; the overall final finish goes to a satin to gloss finish.
Liberon Floor Sealer is a natural based product. Oil-based finish for wood, parquet and other types of wooden flooring. The Floor Sealer enhances the natural wooden characteristics of new and old wood. The formula creates a barrier against liquids like water, alcohol resistant. You can use Liberon Floor Sealer for sealing unvarnished cork surfaces.
If you are thinking of sealing other wooden surfaces like MDF, we can recommend using Liberon Spirit Sanding Sealer. This product is a quick action solution which prepares the surface of bare wood and MDF, before applying a wax finish or decorative items.
Now if you are looking to seal stone surfaces, you can check out Liberon Natural Finish Stone Floor Sealer. This product is a one coat solution. Stone Floor Sealer is very universal on porous stone flooring, it helps protect your interior and exterior stone, terracotta, slate, marble, ceramic, York stone and any similar types stone.
- Enhances and brings out the natural colour and characteristics of new and old wood.
- Seals floor areas on wax and varnished finishes.
- Helps protect the floor against general stains and scratching.
- Endorsed by the Guild of Master Craftsmen.
- Solvent oil-based sealer for wood and other wooden flooring types.
|Coverage||10-12m² per litre|
|Storage||Always store in dry conditions with the lid firmly shut in temperatures above 5°C. Keep out the way of children.|
|VOC||High, its recommend to use in well ventilated areas. Please protect yourself with our Moldex mask respirator range.|
Please check the Safey Data sheet for ingredients.
Sand the floor area if required to do so and ensure you remove all previous finishes that may have been on the surface.
If you have sanded the floor, ensure the surface is clean, dry and free from any dust that may be lingering on the surface to allow the Liberon Floor Sealer to take action.
It’s important to understand that oil finishes bring out natural characteristics of the timber and other wooden surfaces. Wet surfaces will give you an indication to analyse what the final colour could turn out to look like if oil was to be applied.
Always test the product first on a small section of wood to see if the colour and end result is something you want to achieve.
Use only in well- ventilated areas.
Before applying Liberon Floor Sealer, if you are wanting to add a colour to the wood beforehand we can recommend using Liberon Palette Wood Dye. Suitable for dying and adding colour to all interior wood work around the home. The wood dye is designed to leave the wood grains visible to hold the natural beauty within the wood. Allow all wood dyes to dry for a minimum of 8 hours before applying your Liberon Floor Sealer.
Do not use this product on vinyl or similar material floor coverings.
Using this product may dissolve bitumen-based adhesives.
Repeat exposure to this product may cause skin to crack and dry, please wear gloves before using this product to ensure your health and safety.
Shake the contents of the container well before using the product.
Apply a healthy amount of sealer on the surface using a brush, roller or lint-free cloth depending on what you feel comfortable with and the scale of the project.
Allow around 5-10 minutes for the oil to penetrate the wooden surface.
Remove any excess using a dry and clean lint-free cloth.
It’s recommended to apply a minimum of 3 coats in total and allowing 5 hours gap between coats.
Repeat this process if you have to use Liberon Floor Sealer on porous surfaces, or if you are aiming to achieve a higher and more intense finish.
We can recommend using Liberon Floor Wax or Liberon High Resistance Varnish after using Liberon Floor Sealer. Please ensure you leave around 24 hours before applying any other finish on top of the Floor Sealer.
All surfaces which you have applied Liberon Floor Sealer on should always be swept, and vacuumed to maintain the final look and longevity. Any spills should be care for immediately.
If you come across any tough stains, you can apply a mild detergent. Alternatively, you can always sand the area lightly to remove the stain and then repeat the application process of the Floor Sealer.
When using Floor Sealer alone as a floor finish, you may need to re-seal the surface once a year or if you see signs of high traffic.
If you have used cloths, please dispose of them carefully. Lay them out flat outside to dry, failing to do so may cause a fire hazard, causing the cloths to self-combust.
Do not leave impregnated cloths in bundles and near any fire ignition.
Keep out of the reach of children.
Do not empty this product out into drains.
If consumed, seek immediate medical advice and show the label or tin.
Product may cause allergic reactions, please check the product information before using this product.
Manufacturer's Part Numbers (MPN):