Liberon Fine Wood Stripper 500ml
Liberon Fine Wood Stripper
AllFinishes presents to you Liberon. A traditional superior range of wood and surface finishes that have been preserving and protecting British floors since 1912. With high advanced technology, Liberon is unbeatable in quality and are optimised for durability, quick drying with the perfect finish.
Liberon Fine Wood Stripper is designed to remove old varnishes and paint finishes. non-drip qualities of the gel formula which clings and penetrates the surface making it suitable for vertical surfaces.
Liberon Fine Wood Stripper is designed to remove old varnishes and paint finishes on all wood and metal surfaces. Holding strong removal properties but still allows to be gentle to the most fragile wood surfaces as no heavy scrapping is required.
The product is easy to apply with the non-drip qualities of the gel formula which clings and penetrates the surface making it suitable for vertical surfaces.
If you need to remove wax or polish finishes you can use Liberon Wax & Polish Remover. It's made for a unique strong formula, its suitable for not lifing wooden grain or veneers.
- Removes old varnish and paint finishes from interior and metal work.
- Gel like formulation which will create a non-drip quality.
- Tough on varnishes and paint, but provides gentle services on wood.
- Fast action application with drying times between 5-30 mintues.
- Mathylene chloride free solution.
- Does contain high VOC so protect yourself with our high quality Moldex range.
|Coverage||4m² per litre|
|Drying Time||Average of 5-30 minutes|
|Storage||Always store in dry conditions with the lid firmly shut in temperatures above 5°C. Keep out the way of children. Keep away from any flammable ignitions.|
|VOC||High VOC so protect yourself with our high quality Moldex range.|
Please check the Safey Data sheet for ingredients.
Ensure that the surface you are going to treat and remove is clean from any dirt, free from dust and cleaned from any other surface contaminants to ensure that your application process is complete without any problems to the final finish.
wear suitable clothing before applying this product to your wood, wear gloves and protect yourself with mask respirators. Being exposed to high VOC's over a period of time could lead to lung damage
and health problems. Vapours may cause drowsiness and dizziness, check out our high quality Moldex range to provide protection against VOC's and general vapours.
Not wearing gloves and exposing your skin to the product may cause dryness and cracking.
Always test a section of wood to see if the removal is suitable for the compatibility and end result.
Do not apply the removal application in direct sunlight.
Avoid using this product with vinyl and synthetic surface.
Ensure the the product does not interact with your eyes, in case of contact, rinse immediately with plenty of fresh water and seek medical advice if needed.
Before application ensure that the area that you are using the product is well ventilated.
Shake the product well before applying to your wood.
Apply a healthy amount of removal solution using a brush.
Allow the wood stripper to penetrate the wood for 5-30 minutes.
Remove dissolved finish using a plastic scraper or steel wool for carved wooden areas.
It may be necessary to repeat the process if there is more than one finish that needs to be removed.
Once you have finished your removal process, leave the surfaces to dry for 24 hours, then rub down
the area gently using Liberon Steel Wool, grade 0000 or extra fine sanding paper.
After these simple steps, you are then ready to apply the finish you want.
Due to its flammable contents, do not leave near sources of ignition like smoking.
Keep out of the reach of children. If consumed, seek medical advice immediately and show the product or label.
Do not empty into drains.
Manufacturer's Part Numbers (MPN):