Liberon Extreme Woodstain
A highly durable Woodstain designed to protect exterior wood against severe weathering.
Added UV protection significantly protects exterior wood against the most severe weathering. Ideal for use on heavily exposed exterior timber such as cladding, gates, window frames, foors & fences.
- Guaranteed up to 10 years protection
- Resistant to severe weathering
- Long-lasting colour durability
- Outstanding UV protection
|Coverage||12m² per litre|
|Application||Brush, roller or spray|
|Drying Time||4 hours between coats. 24 hours = final|
|Coats||2 coats minimum|
|Storage||Always store in dry conditions with the lid firmly shut. Keep out the way of children.|
Ensure the surface is clean and dry.
When treating bare wood, brush and remove all traces of dust.
For greater protection, timber may be treated with an exterior wood preserver before applying Extreme Woodstain.
When treating previously stained wood, brush the timber to remove any flaking pieces, and sand to a smooth surface and remove all dust.
When treating varnished or painted wood, strip the timber with a general wood stripper.
Neutralise in accordance with wood stripper manufacturer’s instructions, then rinse with water and allow to dry for 24 hours. Sand and remove all dust.
When treating oily wood, degrease before applying Extreme Woodstain.
Stir well before use.
Apply a minimum of two coats of Extreme Woodstain with a brush, spray (10% dilution with wather) or a roller (specially designed for woodstains).
On new or heavily exposed timber we recommend applying a third coat when using a light coloured stain.
Ideal conditions for application are between 12° and 25°C on wood that is not too hot in order to avoid drying marks.
Always test the product on a spare surface or inconsipicuous area for colour, compatability and end result.