Price £50.00
SKU
Jotun Pioner TC

A speedy drying single pack Acrylic resin based topcoat. Use as a finishing coat for application to either steel or concrete substrates.

Single-pack topcoat with quick drying qualities that dries to a semi-gloss finish. Suitble for industrial, topside and superstructure applications. Use as a topcoat in atmospheric environments. Fast drying with excellent self-overcoating and improved levelling properties. For custom RAL or BS colour tints please contact us for a quote.

Area of Use

Various primers and topcoats can be used in conjunction with this product. Recommended for use over an existing oil-based topcoat or Alkyd Primer.

Marine: Topsides and Superstructures

Protective: A wide range of industrial surfaces

Substrate: Coated surfaces

Use over the top of Vinyguard, Pilot QD Primer and both the Jotamastic and Penguard range of Primers.


Approvals

  • Jotun Pioner Topcoat is HAPAS approved to specification 2903.
  • Low Flame Spread in accordance with EU Directive for marine Equipment. Approved in accordance with p arts 5 and 2 of Annex 1 of IMO 2010 FTP Code, or Parts 5 and 2 of Annex 1 of IMO FTPC when in compliance with IMO 2010 FTP Code Ch.8

Technical Information

Type

Physically drying acrylic coating

Coverage 5.7m - 8.5m² per litre
Sheen Semi-Gloss
Stock Colours White and Black
Tintable Yes - please note: bespoke tints are non-refundable
VOC 571.0g/litre
Volume Solids 34%
Application Airless Spray, Brush or Roller
Drying Time 2 hours @ 23°C
Wet Film Thickness (WFT)

120 - 180 μm

Dry Film Thickness (DFT)

40 - 60 μm

Cleaner/Thinner Clean directly after using Jotun Thinner No. 7
Storage 2 years if can kept dry and firmly shut, away from direct sunlight

Documents


Safety 

We take health and safety seriously here at AllFinishes and recommend you use the correct protection for the job. Disregarding safety equipment can be damaging and result in long term health conditions. Please check out our Moldex range for high quality respirators and hearing protection.


Application

Jotun Prioer Topcoat may be suitable for application to other substrates (carefully subject to an adhesion test). Apply with an Airless Spray, saving only Brush application for stripe coatings. For small areas, a roller may be used. Pleaes note: if using a brush or roller care must be taken to ensure the specified dry film thickness is achieved.

Write Your Own Review
You're reviewing:Jotun Pioner Topcoat