A glossy single pack alkyd topcoat that is tintable to almost any colour.
Jotun Pilot II is a single-pack oxidatively drying alkyd coating. Holds superb Gloss retention and can be used as a topcoat in atmospheric conditions. Tintable to bespoke RAL and BS colours.
Area of Use
Various primers and topcoats can be used in conjunction with this product. Recommended for use over an existing oil-based topcoat or Alkyd Primer.
Marine: Engines, Topsides, Decks and Superstructures
Protective: A wide range of industrial surfaces
Substrate: Coated surfaces, Steel or GRP
- Low flame spread certificate according to IMO/Solas directive. Grain, Newcastle Occupational Health
- Food, Compliant with USA, FDA Title 21, Part 175.300 for dry solids
Oxidatively drying alkyd coating
|Coverage||9.6 - 16 m2 per litre|
|Stock Colours||Small colour range|
|Application||Airless spray, High pressure air sPray, Brush or Roller|
|Drying Time||7 hours @ 23°C|
|Wet Film Thickness (WFT)||
60 - 105 μm
|Dry Film Thickness (DFT)||
30 - 50 μm
|Cleaner/Thinner||Clean directly after using Jotun Thinner No. 17|
|Storage||2 years if can kept dry and firmly shut, away from direct sunlight|
We take health and safety seriously here at AllFinishes and recommend you use the correct protection for the job. Disregarding safety equipment can be damaging and result in long term health conditions. Please check out our Moldex range for high quality respirators and hearing protection.
To secure lasting adhesion to the subsequent product all surfaces shall be clean, dry and free from any contamination.
|Coated surfaces||Clean, dry and undamaged compatible
|Clean, dry and undamaged compatible
Jotun Pilot II should be applied using airless spray or conventional spray. You may use a brush or a roller if extra care is taken to ensure the surface is clean, dry and free from any contamination - this will help to esecure lasting adhesion. When applied at a dry film thickness of 40 microns, Jotun Pilot II has a theoretical coverage of 12m2.