Please ensure you are selecting all options when adding to your basket
This is a required field.
Price Range:£46.73
Price £46.73
In stock
SKU
Jotun Jotafloor Rapid Dry

A single-component fast-drying Glossy Alkyd floor paint offering the enhanced durability that most alkyd floor products usually lack.

Ideal for foot traffic and light duty floors. Available in a huge range of bespoke colours - RAL, BS and Jotun colour range. Please contact us for a quote.

Areas of Use

An oxidatively curing alkyd coating that is fast drying and easy to apply. This product is tintable in a wide range of colours in Jotun's Multicolor Industry (MCI) system. It has good colour retention. If enhanced slip resistance is required Jotafloor Non Slip can be used as part of the system. To be used as primer and finish coat in atmospheric environments for properly prepared concrete substrates.

Designed for a range of floors with various levels of exposure. Designed for areas requiring a fast drying, easy to use, light duty floor coating where quick turn around is expected. Recommended areas include exhibition halls, interior floors, concert and sports venues.


Technical Information

Type

Oxidatively curing alkyd coating

Coverage Approximately 10 - 20m2 per litre
Sheen Gloss
Stock Colours None
Tintable Yes - bespoke tints are non-refundable
VOC 465.0g/litre
Volume Solids 50%
Application Airless Spray, Brush or Roller
Drying Time Touch dry in 7 hours, Dry to recoat 10 hours, Fully cured in 7 days @ 23°C
Wet Film Thickness (WFT)

50 - 100 μm

Dry Film Thickness (DFT)

25 - 50 μm

Cleaner/Thinner Jotun Thinner No. 7
Storage Part A: 24 Months, Part B: 48 Months

Technical Data

Tech Data Sheet


Preparation

To secure lasting adhesion to the subsequent product all surfaces shall be clean, dry and free from any contamination.


Application

The product can be applied by

Spray: Use airless spray (thin 5 %).

Brush: Recommended for stripe coating and small areas. Care must be taken to achieve the specified dry film thickness.

Roller: May be used. Care must be taken to achieve the specified dry film thickness.

Conditions during application

The temperature of the substrate should be minimum 10 °C and at least 3 °C above the dew point of the air, measured in the vicinity of the substrate. Good ventilation is usually required in confined areas to ensure proper drying. The moisture content in the substrate should not exceed 4 % (by weight). The coating should not be exposed to oil, chemicals or mechanical stress until fully cured.


Storage

The product must be stored in accordance with national regulations. Keep the containers in a dry, cool, well ventilated space and away from sources of heat and ignition. Containers must be kept tightly closed. Handle with care. Shelf life at 23 °C - 24 months.

Write Your Own Review
You're reviewing:Jotun Jotafloor Rapid Dry 5L
Your Rating