Jotun Conseal TU
Jotun Conseal Touch Up semi-matt, primer-finish for metal surfaces
Jotun Conseal TU is a one component physically drying Acrylic coating which dries to a matt finish.
It is a high build product, fast drying paint that can be used direct to metal.
It can also be used as topcoat in atmospheric environments and can be applied at sub zero surface temperatures.
Please note this product is for professional use only.
Jotun Conseal TU is ideal for exterior metal surfaces such as Previously Coated Metal, Carbon Steel, Shop Primed Steel, Aluminium and Galvanised Steel.
Jotun Conseal TU will dry to a semi-matt finish and can be sprayed or brushed. It is available in any bespoke colour you desire and displays excellent colour retention. It is perfect for adhering to existing aged alkyd, epoxy, zinc epoxy and shop primer paints, is easy to use and has a high opacity.
Jotun Conseal TU is perfect for use on a wide range of industrial structures such as containers, bridges, railings and buildings.
- Suitable exterior metal surfaces
- Available in any colour desired
- Ready to use spray or brush use.
- Can be used over existing alkyd paint, epoxy, zinc epoxy, shop primer
- High opacity 100% Pure Acrylic paint
|Coverage||Approximately 4 - 6.5m2 per litre|
|Application||Spray or Brush|
|Drying Time||Touch dry in 20 minutes, Dry to recoat 2 hours, Fully cured in 10 hours @ 23°C|
Dry film thickness: 75 - 120 μm
|Cleanup||Clean directly after using Jotun Thinner No. 7|
|Storage||2 years if can kept dry and firmly shut, away from direct sunlight|
We take health and safety seriously here at AllFinishes and recommend you use the correct protection for the job. Disregarding safety equipment can be damaging and result in long term health conditions. Please check out our Moldex range for high quality respirators and hearing protection.
To secure lasting adhesion to the subsequent product all surfaces shall be clean, dry and free from any contamination.
|Coated surfaces||Clean, dry and undamaged compatible
coating (ISO 12944-5 6.1)
|Clean, dry and undamaged compatible
coating (ISO 12944-5 6.1)
|Carbon steel||St 2 (ISO 8501-1)||St 2 (ISO 8501-1)|
|Shop Primed Steel||Clean, dry and undamaged shop
primer (ISO 12944-5 6.1)
|Sa 2 (ISO 8501-1)|
|Aluminium||The surface shall be hand or machine
abraded with non-metallic abrasives
or bonded fibre machine or hand
abrasive pads to impart a scratch
pattern to the surface and to remove
all polish from the surface.
|Cleanliness corresponding to
description of Sa 1 (ISO 8501-1)
|Galvanised Steel||The surface shall be clean, dry and
appear with a rough and dull profile.
|Light brush blasting using nonmetallic
abrasive leaving a clean,
rough and even pattern.
The product can be applied by
|Spray||If airless spray is used the paint must be diluted 5-10 % with Jotun Thinner No.7|
|Brush||Use a suitable brush. Care must be taken to achieve the specified dry film thickness.|
|Roller||May be used, but is not recommended for first coat on bare metal. Care must be taken to
achieve the specified dry film thickness.
The product must be stored in accordance with national regulations. Keep the containers in a dry, cool, well ventilated space and away from sources of heat and ignition. Containers must be kept tightly closed. Handle with care.
Shelf life at 23 °C Conseal Touch-Up 48 month(s). In some markets commercial shelf life can be dictated shorter by local legislation. The above is minimum shelf life, thereafter the paint quality is subject to re-inspection.
This product is for professional use only. The applicators and operators shall be trained, experienced and have the capability and equipment to mix/stir and apply the coatings correctly and according to Jotun's technical documentation. Applicators and operators shall use appropriate personal protection equipment when using this product. This guideline is given based on the current knowledge of the product. Any suggested deviation to suit the site conditions shall be forwarded to the responsible Jotun representative for approval before commencing the work.
Health & Safety
Please observe the precautionary notices displayed on the container. Use under well ventilated conditions. Do not inhale spray mist. Avoid skin contact. Spillage on the skin should immediately be removed with suitable cleanser, soap and water. Eyes should be well flushed with water and medical attention sought immediately.